Adjusting Display Mode; Choosing An Appropriate Picture Mode; Working With Two Video Sources (Kvm Switch) - BenQ PD3200Q User Manual

4. In the sub menu, select a function that can be accessed by this key. A pop-up message will
appear, showing that the setup is complete.
Apart from the control keys on the monitor, the controller key 1/2/3 on the Hotkey Puck works as hot keys as
well. Press and hold one of the controller key (1/2/3) for 5 seconds to bring up a list of options, select another
feature of setup menu by pressing
1/2/3 for settings.
Key

Adjusting display mode

To display images of aspect ratio other than 16:9 and size other than the panel size of your
purchased model, you can adjust the display mode on the monitor.
1. Press any of the control keys or the
menu. Select
2. Go to
Picture Advanced
3. Select an appropriate display mode. The setting will take effect immediately.

Choosing an appropriate picture mode

Your monitor provides various picture modes that are suitable for different types of images. See
Picture Mode on page 44
Go to
Picture Advanced

Working with two video sources (KVM Switch)

If you have two computer systems, you might find yourself busy going back and forth between
two sets of keyboard and mouse to control each display separately. Now with the KVM feature
and sufficient I/O ports on one monitor, you can work with one set of keyboard and mouse
only.
Hot key combinations for quick switch
To switch the control, you need to switch to the appropriate input source and then the control
tools (i.e., keyboard and mouse). To make the switch of the control easier, you are
recommended to set the custom keys as the hot keys for
Customizing the hot keys on page 35
Possible
combination
A
B
36 How to adjust your monitor
or , and confirm with
( ) to access the main menu.
Menu
and
Display Mode
for all the available picture modes.
and
Picture Mode
for more information.
Custom Key 1
Input
KVM Switch
. Alternatively, go to
key on the Hotkey Puck to bring up the hot key
.
for a desired picture mode.
and
Input
Custom Key 2
USB Upstream 1
DP
>
System Controller
first. See
KVM Switch
Custom Key 3
USB Upstream 2
HDMI