Camera Settings; Focus; White Balance (Wb) - Sony SSC-SD26P Operating Instructions Manual

Camera Settings

FOCUS

Main menu → <CAMERA SETUP> menu
< C A M E R A S E T U P >
< P A N / T I L T S E T U P >
< C A M E R A T I T L E >
< P R E S E T S E T U P >
< O T H E R S >
< S Y S T E M >
E X I T
→ <FOCUS> menu
MODE AUTO
ACTIVE TIME -----
INTERVAL TIME -----
SENSITIVITY NORMAL
BACK
• Focus can be controlled directly by NEAR or FAR
keys.
• One push auto focus feature is equipped.
• Four focus modes are available: Manual, Auto,
Interval, and Zoom.
• In manual focus mode, focus can be controlled
directly by NEAR and FAR keys.
• In auto focus mode, press NEAR or FAR keys to
switch to manual focus mode until the commands for
lens zooming, horizontal, and vertical rotate button
control signals are received.
• In interval mode, the camera will switch between auto
focus and manual focus modes according to the Active
time and Interval Time settings: Active Time →
Interval Time → Active Time → Interval Time....
• Interval and Active time settings range between 0 and
60 seconds.
• In Zoom trigger mode, the camera will remain in
manual focus mode until the control signals for
ZOOM IN or ZOOM OUT are received from the
keypad.
• Auto focus sensitivity can be set to Normal or Low.
Adjust Focus setting options
1
Press "95," and then hold the PRESET key for
2 seconds to enter the main menu screen.
2
Move the cursor to <CAMERA SETUP>, and then
press the OPEN key to enter the <CAMERA
SETUP> menu.
3
Move the cursor to <FOCUS>, and then press the
OPEN key to enter the option.
<FOCUS>
WB ATW
<AE>
x 2 6
ZOOM LIMIT
5
ZOOM SPEED
1 0
SHARPNESS
<SYNC LOCK>
P 1 OFF
PRIVACY ZONE
<ALARM ACTIONS>
BACK
4
Move the cursor to <MODE>, and then press the
OPEN key to enter the mode selection menu.
5
Move the joystick up and down to choose the
function to use.
6
Press the OPEN key to confirm, or press CLOSE
to cancel selection and exit from the menu screen.

WHITE BALANCE (WB)

Main menu → <CAMERA SETUP> menu
< C A M E R A S E T U P >
< P A N / T I L T S E T U P >
< C A M E R A T I T L E >
< P R E S E T S E T U P >
< O T H E R S >
< S Y S T E M >
E X I T
• 6 white balance modes are available: ATW/AUTO/
ONE PUSH WB/INDOOR/OUTDOOR/MANUAL.
• ATW mode: white balance ranges form 2000°K to
10000°K.
• AUTO mode: white balance ranges form 3000°K to
7500°K.
• ONE PUSH WB mode: if you want to use hot key
combination (number "73" +PRESET key) to
perform ONE PUSH WB, the mode must be set to
ONE PUSH WB first., and then ONE PUSH WB
function will be activated.
• INDOOR mode: 3200K is the reference color
temperature.
• OUTDOOR mode: 5800K is the reference color
temperature.
• MANUAL mode: RED and BLUE levels can be
adjusted manually.
Change WB opotions
1
Press "95," and then hold the PRESET key for
2 seconds to enter the main menu screen.
2
Move the cursor to <CAMERA SETUP>, and then
press the OPEN key to enter the <CAMERA
SETUP> menu.
3
Move the cursor to WB, and then press the OPEN
key to enter the WB mode.
4
Move the joystick up and down to choose the
function to use.
5
Press the OPEN key to confirm, or press CLOSE
to cancel selection and exit from the menu screen.
<FOCUS>
WB ATW
<AE>
ZOOM LIMIT x 2 6
ZOOM SPEED 5
SHARPNESS 1 0
<SYNC LOCK>
P 1 OFF
PRIVACY ZONE
<ALARM ACTIONS>
BACK
9
Camera Settings