Sony SSC-SD26P Operating Instructions Manual page 27

Shortcut key
97+ Preset
98+ Preset
99+ Preset
101+ Preset
102+ Preset
103+ Preset
104+ Preset
105+ Preset
1 ~ 32, 35 ~ 66, 111 ~ 255+Set Preset
83+ Set Preset
90+ Set Preset
91+ Set Preset
92+ Set Preset
93+ Set Preset
95+ Set Preset
101+ Set Preset
102+ Set Preset
103+ Set Preset
104+ Set Preset
– 123+Preset-unavailable
– only 209 points can be preset and there are 10 points preserved for future use such as 67 ~ 69, 94, 100, 106 ~ 110
Tips
• +Preset: press the PRESET key once, for example: <Begin auto scan>: press number key 99, and then press the
PRESET key.
• +Set Preset: press and hold the PRESET key for 3 seconds, for example: <Open OSD menu>: press number key
95, and then press and hold the PRESET key for 3 seconds.
• Explanations about keypad operations in this manual are based on the Pelco KBD300A.
Function & Action
Start random scanning
Start frame scanning
Acivate auto scanning
Run Recording Tour - Group 1, repeatable
Run Recording Tour - Group 2, repeatable
Run Recording Tour - Group 3, repeatable
Run Recording Tour - Group 4, repeatable
Stop Recording Tour-record, "PATTREN STOP" appears on the
screen.
Configure the P/T/Z position, "ACCEPT" blinking on the screen
Enter privacy zone 1-8 setup mode
Set Joystick left limit, "MANUAL LEFT LIMIT" appears on the
screen
Set Joystick right limit, "MANUAL RIGHT LIMIT" appears on
the screen.
Set scan left limit, "SCAN LEFT LIMIT" appears on the screen.
Set scan right limit, "SCAN RIGHT LIMIT" appears on the
screen.
Open OSD menu
Start pattern record - Group 1 with "PATTERN START" appears
on the screen. Can not enter OSD menu during recording.
Maximum recording time 6 min.
Start pattern record - Group 2 with "PATTERN START" appears
on the screen. Can not enter OSD menu during recording.
Maximum recording time 6 min.
Start pattern record - Group 3 with "PATTERN START" appears
on the screen. Can not enter OSD menu during recording.
Maximum recording time 6 min.
Start pattern record - Group 4 with "PATTERN START" appears
on the screen. Can not enter OSD menu during recording.
Maximum recording time 6 min.
27
Preset Commands