Modem (Winxp); Touchpad (Winxp); Pcmcia/Card Reader (Winxp); Hot-Key (Winxp) - Prestigio Visconte 1450W User Manual

3. Click Finish.
4. The network settings can now be configured.

Modem (WinXP)

1. Click 5.Install Modem Driver > Yes from the Drivers Installer menu.
OR
Click Start (menu) > Run... and navigate (Browse...) to D:\Drivers\Modem\ssetup.exe and click OK (click Continue Any-
way if asked if you want to continue at any time).
2. Click OK.
3. The modem is ready for dial-up configuretion.
Modem Country Selection
Be sure to check if the modem country selection is appropriate for you (Control Panel > Phone
and Modem Options).

TouchPad (WinXP)

1. Click 6.Install TouchPad Driver > Yes from the Drivers Installer menu.
OR
Click Start (menu) > Run... and navigate (Browse..) to D:\Drivers\TouchPad\SETUP.EXE and click OK.
2. Click Next > Next (click Continue Anyway if asked if you want to continue at any time).
3. Click Finish to restart the computer.

PCMCIA/Card Reader (WinXP)

1. Click 7.Install PCMCIA Driver > Yes from the Drivers Installer menu.
OR
Click Start (menu) > Run... and navigate (Browse...) to D:\Drivers\PCMCIA\Setup.exe and click OK.
2. Click Next > Next.
3. Click Finish to restart the computer.

Hot-Key (WinXP)

1. Click 8.Install Hotkey Utility > Yes from the Drivers Installer menu.
OR
Click Start (menu) > Run... and navigate (Browse..) to D:\Drivers\Hotkey\Setup.exe and click OK.
2. Choose the language you prefer, and click OK.
3. Click Next.
4. Click Finish to restart your computer.

AutoMail (WinXP)

The AutoMail Driver must be installed manually as per the instructions below:
1. Click Start (menu) > Run... and navigate (Browse..) to D:\Drivers\AUTOMAIL\SETUP.EXEand click OK.
2. To continue click Next > Next > Finish.
30
PRESTIGIO VISCONTE 1450W