Table of Contents
Advertisement
CONNECTING YOUR BLUETOOTH DEVICE USING NFC
ABOUT NFC (Near Field Communication) is a technology enabling short-range
wireless communication between various devices, such as mobile phones and IC
tags Thanks to the NFC function, data communication can be achieved easily just
by touching the relevant symbol or designated location on NFC compatible devices.
• Make sure your Smartphone or Bluetooth device has the NFC feature, and it is
turned ON (enabled).
• Turn on the JBS-600 power, rotate the SOURCE Control (#5) on main unit and
select Bluetooth mode, "BT" will be shown on display and flash.
• Hold the back of your smartphone against the
the top of the unit (Check the owner's manual of your Bluetooth device to locate
the NFC touch point if you are not sure where it is).
• If the JBS-600 is in pairing mode, it will turn on and enter Bluetooth mode
automatically and pair with your smartphone. Display will change show "BT"
steadily.
• Some smartphones may ask you to confirm the pairing if they are not paired
before.
NOTE:
If you have multiple NFC compatible devices, just touch the smartphone to a
different device to switch the connection to that device. For example, when your
smartphone is connected with NFC compatible headphones, just touch the
smartphone to the system to change the Bluetooth connection to the system (one
touch connection switching).
CONNECTING YOUR BLUETOOTH DEVICE BY PAIRING
Turn on the JBS-600 power, rotate the source Button on main unit to select
•
Bluetooth mode, the "BT" will show on display and flash and you will hear the
voice "PAIRING".
If the JBS-600 has never been paired with a Bluetooth device before or cannot
•
find the last paired device, the flashing "BT" on LCD will indicate the JBS-600 is
in search mode. You need to follow the pairing instructions below to link the
JBS-600 with your Bluetooth device.
1. Turn on Bluetooth function of your device and enable the search or scan
function to find JBS-600. (see your device's instructions to add or setup a
Bluetooth device).
2. Select "JBS-600" from the device list when it appears on your device screen. If
required, enter the pass code "0000" to pair (link) SMPS-621 with your
3. If you are pairing (linking) your computer to the speaker using Bluetooth, you
may need to set the JBS-600 as your computer's default sound device.
4. Once paired with a device, the "BT" on the LCD display will light steadily and
you will hear the voice "PAIRED" to confirm that pairing is completed.
BLUETOOTH OPERATION
E-13
logo (#11) located on
device.
Advertisement
Table of Contents
