Clock Operation; Alarm Operation - Jensen JBS-600 User Manual

Bluetooth digital music system with cd
Hide thumbs Also See for JBS-600:
Table of Contents

Advertisement

Recalling Preset Memory Stations:
In radio mode, recall the previous/next preset channel by touching the
(#16/#17)
located on the top of the unit
NOTE:
The FM/AM radio station presets will need to be reset if the power is interrupted
or in the event of a power outage.
1.
In Power Off (Standby) mode, press the Time button (#7) on main unit.
"24H"or"12H" format will show flashing on the display.
2.
Rotate the SOURCE Control (#5) on main unit to select 24H or 12H format if
necessary. Press the Time button (#5) again to confirm the time format and
enter the clock setup mode, the Hour digits will be flashing.
3.
Rotate the Source Control (#5) on main unit to adjust the hour.
4.
Press the TIME Button to confirm, the minute digits will be flashing.
5.
Rotate the Source Control (#5) on main unit to adjust the minute.
6.
Press the Time button (#7) again to complete the setting.
NOTES:
To check the current time with the power ON, press the Time button (#7) on
the main unit. The current time will show for a few seconds and then return
to the previous screen.
To check the current time in standby mode, press any button except the
Standby button (#10) on the main unit to turn on the backlight of the display.
The display will dim again after a few seconds.
The clock and radio station presets will need to be reset if the power is
interrupted or in the event of a power outage.
1.
In standby mode, press the Alarm button (#6) on main unit, the "alarm-
1" icon appears on the display and flash.
2.
Rotate the SOURCE Control to select the "alarm-1" or "alarm-2"
3.
Press the ALARM button (#6) to confirm,
4.
Rotate the SOURCE Control to select ON.
(Selecting OFF will turn off the alarm).
5.
Press the ALARM Button to confirm, the alarm wake up source will appear on
display.
6.
Rotate the SOURCE Control to select wake to CD, FM or BUZZ
7.
Press the ALARM Button to confirm. The alarm volume "VOL" will appear on
display.
or
buttons on remote controller.
/

CLOCK OPERATION

ALARM OPERATION

E-10
/

Advertisement

Table of Contents
loading

Table of Contents