Safety Warnings; Regulatory Information; Fcc Statements - Topcon MC-i3 Installation And Setup Manual

Small lightweight, for indicate only machines

Hide thumbs Also See for MC-i3:

Safety Warnings

RF Radiation Hazard Warning

To ensure compliance with FCC and Industry Canada RF exposure requirements, this device must be installed in a

location where the antennas of the device will have a minimum distance of at least 20 cm from all persons. Using

higher gain antennas and types of antennas not certified for use with this product is not allowed.

Installez l'appareil en veillant à conserver une distance d'au moins 20 cm entre les éléments rayonnants et les

personnes. Cet avertissement de sécurité est conforme aux limites d'exposition définies par la norme CNR-102 at

relative aux fréquences radio.

This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15

of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the

equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at his own expense. If this

equipment does cause interference to radio or television equipment reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

1) Reorient or relocate the receiving antenna.

2) Move the equipment away from the receiver.

3) Plug the equipment into an outlet on a circuit different from that to which the receiver is powered.

4) Consult the dealer or an experienced radio/television technician for additional suggestions.

IC statements

This Class B digital apparatus complies with Canadian ICES-003.

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the

following two conditions: (1) this device may not cause interference, and (2) this device must accept any

interference,including interference that may cause undesired operation of the device.