Installation Preparation; Installation Warnings - Cisco ASA 5508-X Hardware Installation Manual

Installation Preparation

This chapter prepares you to install your ASA, and contains the following sections:
•
•
•

Installation Warnings

Be sure to read the
Take note of the following warnings:
Warning Read the installation instructions before connecting the system to the power source.
Before working on a chassis or working near power supplies, unplug the power cord on AC units; disconnect
Warning
the power at the circuit breaker on DC units.
Before working on equipment that is connected to power lines, remove jewelry (including rings, necklaces,
Warning
and watches). Metal objects will heat up when connected to power and ground and can cause serious burns
or weld the metal object to the terminals.
Warning During this procedure, wear grounding wrist straps to avoid ESD damage to the card. Do not directly
touch the backplane with your hand or any metal tool, or you could shock yourself.
Warning This product requires short-circuit (overcurrent) protection to be provided as part of the building installation.
Install only in accordance with national and local wiring regulations.
Online Only
Installation Warnings, page 17
Safety Recommendations, page 18
Site Environment , page 19
Regulatory Compliance and Safety Information
C H A P T E R
document before installing the ASA.
Cisco ASA 5508-X and ASA 5516-X Hardware Installation Guide
2
17