Vehicle Belt Compatibility - R82 Wallaroo User Manual

Vehicle Safety Belts
NOTE: The information in this
section only applies to installation
with vehicle safety belts.
IMPORTANT: Vehicle seats and
safety belts differ from vehicle
to vehicle. Refer to your vehicle
owner's manual for specific
information about vehicle safety
belts and their use with child
restraints. Some vehicles have
no seating positions which are
compatible with this child restraint
or any other child restraint. If
in doubt, contact the vehicle
manufacturer for assistance.
This child restraint can fit securely
in most vehicles using existing
vehicle belts. However, some
vehicle designs prevent a secure fit
of the child restraint.
The vehicle owner's manual will
have information on the types of
vehicle belts. If your belt type is
listed on this page, select another
seating position or use Lower
Anchors and Tethers for Children
(LATCH).
support.R82.org

VEHICLE BELT COMPATIBILITY

of vehicle belts are not compatible
with this child restraint:
Front vehicle belts with top or
bottom anchorage points in the
door. (Fig. A & B)
Motor-driven, automatic vehicle
belts. (Fig. B)
Lap-shoulder belts that have
separate retractors for the shoulder
section and the lap section in which
the lap section retractor does not
lock.
Non-locking, two-point Emergency
Locking Retractor (ELR) vehicle
belts without the use of a belt-
shortening clip.
Lap-shoulder ELR vehicle belts
without the use of a locking clip.
NOTE: Reference your vehicle
owner's manual to determine the
kind of retractors used in your
vehicle and how to operate them.
A
WARNING! The following types
7
B