Rethreading The Buckle - R82 Wallaroo User Manual

A
B
support.R82.org
CARE AND MAINTENANCE

Rethreading the Buckle

1. Locate the necessary buckle
slot.
2. Turn the buckle retainer so that
the short side will fit through the
slot in the cover and child restraint
shell (Fig. A).
3. Push the retainer through the
slots in the cover and shell to the
bottom of the child restraint.
4. Pull buckle away from the child
restraint until tight, then verify that
the strap is not twisted and the
release button is facing out.
5. Verify that the buckle retainer
lies flat against the child restraint
shell (Fig B).
29