Related Manuals for R82 Panda Futura 5
Summary of Contents for R82 Panda Futura 5
- Page 1 5 English Manual EN 12182 EN 12183 © 2008 R82 A/S. All rights reserved. The R82 logo and the Panda Futura chairs are registered trademarks of R82 A/S. 2018-06 - rev. 10...
-
Page 2: Table Of Contents
CONTENTS Intended purpose............... 3 Declaration of Conformity ..........3 R82 Warranty ..............3 Safety ................3 Disposal ................3 Service information ............4 Washing ................4 Warewashing machine ............4 Disinfection ................ 4 Accessories and spare parts ..........4 Service interval ..............4 Service Check List ............. -
Page 3: Intended Purpose
Never leave the user unattended in this product. En- Intended use sure permanent supervision by an adult The Panda Futura 5 seat is available in two different ver- • Repair/replacements must only be made using new sions: Panda Standard and Panda Active. The Standard... -
Page 4: Service Information
Accessories and spare parts Maintenance of a medical device is wholly the responsibility The products from R82 can be supplied with a variety of of the owner of that device. Failure to maintain a device in accessories which comply with the needs of the individual accordance with the instructions may invalidate the device’s... - Page 5 See page 7 89188-5xx See page 9 89930-5 See page 9 89642-xxx See page 10 89658-xxxx See page 11 8910401-4 See page 12 89619-x See page 12 8910725-5...
-
Page 6: Measurements
Backrest angle The Panda Futura 5 is measure according to ISO 7176-5 with seat in horizontal and back in vertical position. We sup- ply various types of accessories which is why the weight and measurements are listed without. Different settings than... -
Page 7: Transfer
DMR ver.: XXXX Max load: xxx kg IDENTIFICATION Art. no.: XXXXXXX Product: XXXX - Size X Panda Futura 5 seat (XX)XXXXXXXXXXXXXX(XX)XXXXXX(XX)XXXXXX A) Serial number The label is placed on the seat under the cushion. In the top right-hand corner. B) Manufacturer The label is placed on the seat under the cushion. -
Page 8: Symbols
Symbols For indoor and outdoor use Consult instructions The latest version of the instructions is always available on the R82 web- site and can be printed in larger sizes Warning This symbol appears in the User Guide along with a number referring to the instructions below. - Page 9 READY FOR USE The Panda Futura 5 seat is available as (A) STANDARD and as (B) ACTIVE. The main difference between the two models is the shaping of the seats. The ACTIVE seat is shaped to allow greater upper extremity move- ment and is ideal for more active children.
- Page 10 LUMBAR SUPPORT The Panda Futura 5 is delivered including adju- stable lumbar support in the back cushion. Move the lumbar support up or down (A) according to the need for support.
-
Page 11: Seat Extension
* The pommel is fitted into the bracket and is adjusted in depth by using the handle (B). SEAT EXTENSION The Panda Futura 5 is prepared for mounting of seat extension. * Push the bars from the seat extensions into the two slots beneath the seat. - Page 12 BACK EXTENSION The Panda Futura 5 is prepared for mounting of back extension. * Mount the bar from the back extension into the fitting on the back and fasten with the thumbscrew (A). * Loosen the thumbscrew (A) or (B) to adjust the height.
- Page 13 5 mm Allen key. * Adjust the height and fasten. SWING-AWAY SIDE SUPPORTS The Panda Futura 5 is prepared for mounting of swing-away side supports. * Place the side supports in the slots. * Place the nuts, one by one, through the hole (A) in the back and into the slots in the side support.
- Page 14 ARMREST Height adjustment: Open the handle (A) to move the armrest into po- sition. Place the small screw (B) in desired height position. Close the handle after adjustment. Tilting the armrest cushion: Loosen the handle (C). Adjust and angle of the armrest cushion sidewise: Loosen the screws (D) beneath the cushion.
- Page 15 CROSS VEST The vest and cross vest can be opened and closed by using the buckles and the zip. * Mount the shoulder straps through the hole in the back cushion and into the fixlock fittings on the upper back (A). * Mount the upper straps in the sides in the fixlock fittings on the back (B).
- Page 16 Unlock the red handle (A). Pull out the knob (B), pull the seat forward, and lift at the same time. Max. load on the frame is 60 kg. The Panda Futura 5 can NOT be mounted on an frame size 1. We refer to the 'Frames Manual' for further...
- Page 17 PUSH BRACE FOR HIGH-LOW:X INDOOR FRAME Depth adjustment: Loosen the screws (A) on both sides of the frame and adjust the depth of the push brace. The push brace adjusts in two positions and clicks into place with the security nut. Fasten in the required position.
Need help?
Do you have a question about the Panda Futura 5 and is the answer not in the manual?
Questions and answers