Connecting A Personal Computer; Displaying An Image From A Personal Computer; Connecting An Amplifier/Av Receiver; Avoiding Unwanted Feedback - Pioneer PureVision PDP-427XG Operating Instructions Manual

10 Using with other equipment

Connecting a personal computer

Use the PC terminals to connect a personal computer.
• The PC input terminal is DDC1/2B-compatible.
PDP-427XG (rear)

Displaying an image from a personal computer

To watch an image coming from the personal computer, press PC
on the remote control unit or use the INPUT button on the plasma
display to select PC.
When connecting to a personal computer, the correct input signal
type is automatically detected. If the personal computer image
does not come in clearly, you may need to use Auto Setup menu.
See page 35.
Note
• The PC terminals cannot be used for audiovisual equipment.
Resolution
720 x 400
640 x 480
800 x 600
1024 x 768
1360 x 768
42
En
3
4
RGB cable
Stereo
mini jack cable
PC
Frequency
70 Hz
60 Hz
72 Hz
75 Hz
56 Hz
60 Hz
72 Hz
75 Hz
60 Hz
70 Hz
75 Hz
60 Hz

Connecting an amplifier/AV receiver

You can enjoy more powerful sound by connecting an amplifier /AV
receiver and subwoofer to the plasma display.
PDP-427XG (rear)
Stereo audio
cable
Note
• For details, refer to the operation manual for the audio
equipment to be connected.
• If your amplifier/AV receiver has a subwoofer output, it is not
necessary to connect the subwoofer output on the plasma
display.
• Audio signals corresponding to the currently displayed images
are always output to the MONITOR OUT and SUBWOOFER
terminals.
• Audio from a connected subwoofer is muted when you have
selected "Sub" for "Headphone Output" (page 33) and
connected headphones.

Avoiding unwanted feedback

You can prevent unwanted feedback from adversely affecting the
quality of images. Specify the output terminal whose output is to be
inhibited.
1 Press HOME MENU.
2 Select "Option" ( then ENTER).
3 Select "Monitor Out" (
4 Select the desired parameter (
Monitor Out
Always Output
INPUT1 Prohibit
INPUT2 Prohibit
INPUT3 Prohibit
INPUT4 Prohibit
INPUT5 Prohibit
Audio cable
Amplifier/ Subwoofer
AV receiver
then ENTER).
then ENTER).