Appendix - Accessories (Optional) - Riello RLS 100 Installation, Use And Maintenance Instructions

A

Appendix - Accessories (optional)

EXTENDED HEAD KIT
"Standard head" burners can be transformed into "extended
head" versions, by using the special kit. The kits available for the
various burners, giving the original and the extended lengths, are
listed below.
Burner
RLS 70
RLS 100
RLS 130
DEGASSING UNIT
It may occur that a certain amount of air is contained in the fuel
sucked up by the pump.
This air may originate from the fuel itself as a consequence of de-
pressurisation or air leaking past imperfect seals.
In double-pipe systems, the air returns to the tank from the return
pipe; in single-pipe systems, the air remains in circulation causing
pressure variations in the pump and burner malfunctions.
For this reason, we advise installing a degassing unit near the
burner in single-pipe installations.
Degassing units are provided in two versions:
Burner
RLS 70-100-130 (without filter)
RLS 70-100-130 (with filter)
Degassing unit characteristics
Burner output
Fuel pressure
Ambient temperature
Fuel temperature
Attachment connectors
(without filter)
Attachment connectors
(with filter)
SOUND PROOFING BOX
If noise emission needs reducing even further, sound-proofing
boxes is available.
Burner Box type
RLS 70-100-130
LPG KIT
For burning LPG gas, a dedicated kit is available with RLS dual
fuel burners.
Burner
RLS 70-100-130
20033295
Appendix - Accessories (optional)
Code
3010345
3010346
3010347
Code
20034277
20034281
80 kg/h max
0.7 bar max
40 °C max
40 °C max
FF G 1/4 tank side
FM G 3/8 conic burner side
FF G 3/8 tank side
FM G3/8 conic burner side
Average
noise
reduction
[dB(A)]
C4/5 10 3010404
Code
3010305
GAS MAX PRESSURE SWITCH KIT
If necessary a gas max pressure switch kit is available.
Burner
RLS 70-100-130
GAS TRAINS APPROVED ACCORDING TO EN 676
Refer to the instruction manual.
Code
40
GB
Code
3010493