Start-up, calibration and operation of the burner
7.10
LPG - Propane - Butane operation
The burners can also operate on LPG-Propane- Butane gases.
In this case it is necessary to assemble the nozzles 2)(Fig. 41) on
the holes 1) and the caps 3) on the small pipes 4) supplied with
the burner.
Apply the self-adhesive label for LPG operation near the charac-
teristic label.
The firing rate range and burner adjustment are similar to those
for natural gas.
The G31 (Propane) gas pressure is shown on page 23.
Gas train:
use the gas train for natural gas, see page 23, with 1"1/2 or 2" di-
ameter.
D1181
Fig. 41
32
20033295
GB