Connecting Hdmi Equipment - Pioneer PDP-LX508G Operating Instructions Manual

Using with other equipment

Connecting HDMI equipment

For INPUT 3, connect an HDMI cable for the video and (if
necessary) a stereo audio cable for analog audio. You can select
the audio and video format according to the device you've
connected – see below for more.
MONITOR SUB
OUT WOOFER
(Rear view)
MONITOR SUB
OUT WOOFER
Stereo audio
cable
HDMI device
For INPUT 4 and INPUT 5, connect just an HDMI cable – this
carries both the audio and video signals (the illustration below
shows the connection to INPUT 5).
MONITOR SUB
OUT WOOFER
(Rear view)
HDMI device
Activating the INPUT 3 HDMI terminal
1
2
3
4
5
Item
Disable (default) Deactivates the INPUT 3 HDMI terminal
Enable
6
HDMI compliant cable
(HDMI cable having the
Specifying the type of input signals
HDMI mark)
1
HDMI terminal.
2
3
Item
Video (default)
PC
4
HDMI compliant cable
(HDMI cable having the
HDMI mark)
Press HOME MENU.
Select "Option" (/ then ENTER).
Select "HDMI Input" (/ then ENTER).
Select "Setting" (/ then ENTER).
Select "Enable" (/ then ENTER).
Description
Activates the INPUT 3 HDMI terminal
Press HOME MENU to exit the menu.
Note
• You need not manually activate the INPUT 4 and INPUT 5 HDMI
terminals.
Repeat steps 1 to 3 provided for Activating the INPUT 3
Select "Signal Type" (/ then ENTER).
Select "Video" or "PC" (/ then ENTER).
Description
Select this option except when a PC is connected
Select this option when a PC is connected to the HDMI
input terminal
Press HOME MENU to exit the menu.
Caution
• Make sure to select "PC" when a PC is connected to the HDMI
input terminal.
Note
• In the "Video" mode, the image is "over-scanned" (enlarged),
and the mode is automatically switched to "PC" when PC
signals are received.
• In the "PC" mode, the image is displayed in full size for
optimum image quality.
when "Video" is selected when "PC" is selected
("overscan" size screen) ("underscan" size screen)
10
47
En