Using The Hdmi Control; Using The Hdmi Control Functions - Pioneer PDP-LX508G Operating Instructions Manual

11

Using the HDMI Control

Chapter 11
Using the HDMI Control

Using the HDMI Control functions

You can operate such Pioneer devices as a recorder, player or AV
system that support the HDMI Control functions using the remote
control of the plasma television.
The HDMI Control functions include playback of content using on-
screen control panel on the plasma television, recording of a TV
program while watching, timer recording using a program list on
the connected recorder, and confirmation of timer recording
registered in the recorder. For details, see the table below.
Note
• Maximum number of devices that can be connected and
controlled using the remote control unit of the plasma
television is as follows: recorder x 2, player x 2, AV system x 1.
• Not all device operations may be available for HDMI Control
functions.
HDMI Control functions
Function Description
Playback of The proper input source is automatically
content
selected and the content is played back on the
plasma television as you press PLAY on the
connected device
On-screen Recorder/player operation can be controlled
control
on-screen or with the remote control unit of
the plasma television (play, stop, fast forward/
reverse, etc.)
Recording of TV
The program now watching can be recorded
program
using the remote control unit of the plasma
television
Timer recording Timer recording using a program list on the
recorder connected
Confirmation of
Recording schedule registered in the
recording
recorder can be displayed and confirmed on
schedule
the screen using the remote control unit of
the plasma television
Display Information on the display menu language is
Language
transferred to the recorder or player
Setup
connected to the plasma television. For
details, see the operation manual that came
with the recorder or player.
AV system Receiver/amplifier operation can also be
control
controlled with the remote control unit of the
plasma television (volume, surround mode
and input selection of the HDMI terminal)
Power On
The connected recorder can be turned On
when the plasma television is turned On.
The plasma television can be turned On when
the connected recorder(s) or player(s) is
turned On and images are input to the plasma
television.
Power Off The connected device(s) can be turned Off
when the plasma television is turned Off
56
En
Note
• When using the HDMI Control functions, operate the remote
control unit while pointing it toward the remote control sensor
( ) located at the bottom right of the front panel of the plasma
t
television.
• You cannot use two or more HDMI terminals at the rear of the
plasma television at the same time except "Power Off" and
"Display Language Setup" functions.
Usable
devices
Recorder/
player
Recorder/
player
Recorder
Recorder
Recorder
Recorder/
player
AV system
Recorder
Recorder/
player
Recorder/
player/AV
system
• Press +/– or to adjust volume for
i e
the AV system.
• Press , , , , ENTER, RETURN
) or color (BLUE, RED, YELLOW,
(
GREEN) buttons to use functions such
as the disc navigator on the connected
recorder or player.