Installation Precautions - Pioneer PDP-LX508G Operating Instructions Manual

02 Safety precautions

Installation precautions

Observe the following precautions when installing with any items
such as the optional stand.
When using the optional stand, brackets, or equivalent
items
Ask your dealer to perform the installation.
Be sure to use the supplied bolts.
For details, see the instruction manual that comes with the
optional stand (or equivalent items).
When using other items
Consult your dealer.
The following mounting holes can be used for the installation:
Rear (PDP-LX608G)
Mounting
holes
Rear (PDP-LX508G)
Mounting holes
10
En
MONITOR SUB
OUT WOOFER
Median line
Mounting holes
MONITOR SUB
OUT WOOFER
Median line
Side view
Plasma television
Caution
• Be sure to use four or more mounting holes symmetrical to the
vertical and horizontal median lines.
• Use M8 screws, which go 12 mm to 18 mm in depth from the
Mounting
mounting surface of the plasma television. See the side view
holes
above.
Median
• Be careful not to block the ventilation opening at the rear of the
line
plasma television.
• Be sure to install the plasma television on a flat surface
because it contains glass.
• The screw holes other than the illustrations on the left are to be
used only for the specified products. Never use them for
mounting non-specified products.
• Do not mount or remove the plasma television to or from the
stand, with speakers attached.
Note
• It is strongly recommended to use the optional Pioneer
mounting products.
• Pioneer shall not be liable for any personal injury or product
Median
damage that results from the use of mounting items other than
line
the optional Pioneer products.
Mounting surface
Mounting bracket
(or equivalent item)
M8 screw
12 mm to 18 mm