Fitting A Furniture Door; Drilling Positions On Framed Doors - Miele F 123 Ui-2 Operating And Installation Instructions

Installing the appliance
^ If the front slat on the facing does not
align with the front edge of the plinth
facing, cut off another slat a.
^ Use pliers to remove the vertical ribs
b.
^ Shorten the ventilation grill supports
b by dimension A
(= ventilation grille bracket
overhang).
^ Secure the plinth facing to the run of
kitchen units a.
^ Push the ventilation grille onto the
bracket c.
Downloaded from Fridge-Manual.com Manuals
36

Fitting a furniture door

If there are no pre-drilled holes in the
furniture door, holes have to be drilled
as shown on the following drawing:

Drilling positions on framed doors