Fitting The Furniture Door - Miele F 32202 i Operating And Installation Instructions

Fitting the furniture door

The furniture door must be at least of 16
mm thick and not exceed 19 mm thick.
The following gap dimensions must be
maintained:
– The gap between the furniture door
and the unit door above must be at
least 3 mm.
– The vertical gap between furniture
doors should also be about 3 mm.
The exact dimension will vary
depending on the radius of the
furniture door edges.
If fitted in a run of units make sure that
the top edge of the furniture door is at
the same height as neighbouring unit
doors.
The furniture door must be fitted
correctly and not under tension
Installing the appliance
Fitting a door front which is heavier
than the maximum permitted could
damage the hinges. This can cause
subsequent functional problems.
Before fitting furniture doors, ensure
that the weight of the door does not
exceed the maximum permitted:
Appliance
F 32202 i
When fitting large or divided furniture
doors an extra fitting kit or set of
fixing brackets is required. These are
available to order from Miele.
Maximum weight of
furniture door in kg
16
61