Cleaning And Care; Cleaning The Interior And Accessories; Ventilation Gaps; Door Seal - Miele F 123 Ui-2 Operating And Installation Instructions

Never use cleaning agents
containing abrasive substances
such as sand, soda, acids or
chlorides or chemical solvents.
"Non-abrasive" cleaning agents are
also unsuitable as they can cause
matt areas to appear.
Make sure that water cannot get into
the electronic unit or into the

ventilation gaps.

Do not use steam cleaning
apparatus to clean the appliance.
Steam could reach the electrical
components and cause a short
circuit.
The data plate located inside the
appliance must not be removed. It
contains information which is required
in the event of a service call.
^ Clean the appliance immediately
after defrosting it.
^ Switch the appliance off, switch off at
the wall socket and remove the plug.
Take any food out of the appliance
and store it in a suitable cool place
(e.g. cool-box or another freezer).
Remove all the freezer drawers from
the appliance.
Downloaded from Fridge-Manual.com Manuals

Cleaning and care

Cleaning the interior and
accessories
Use warm water with a little washing up
liquid. Wash all accessories and
drawers by hand only. Do not wash in a
dishwasher.
^ After cleaning, wipe the interior and
accessories with a damp cloth, and
dry with a soft cloth. Leave the door
open to air the appliance for a short
while.
Ventilation gaps
^ The ventilation gaps should be
cleaned on a regular basis with a
brush or vacuum cleaner. A build-up
of dust will increase the energy
consumption of the appliance.

Door seal

Do not use any oils or grease on the
door seal as these will cause the
seal to deteriorate and become
porous over time.
The door seal should be cleaned
regularly with clean water and then
wiped dry with a soft cloth.
23