Sound Adjustments; Listening To Audio From The Sub Screen Using Headphones; Sound Treble; Bass - Pioneer PDP-428XDA Operating Instructions Manual

Setting up

Sound adjustments

You can adjust the sound quality to your preference with the
following settings.
Adjust the sound to your preference for the chosen AV Selection
option. See page 30.
1 Press HOME MENU.
2 Select "Sound" (/ then ENTER).
3 Select an item to be adjusted (/).
4 Select the desired level (/).
Sound STANDARD
Treble

Bass

Balance

Reset

Sound Effect

Headphone Output

Sub Volume

 button
Item
Treble For weaker treble
Bass For weaker bass
Balance Shifts the audio balance to
the left
5 Press HOME MENU to exit the menu.
Note
• You cannot adjust the sound for listening with headphones.
• If you perform sound adjustments with headphones
connected, the new settings will become effective as soon as
you disconnect the headphones.
• To restore the factory defaults for all items, press / to
select "Reset" in step 3, and then press ENTER. A confirmation
screen appears. Press / to select "Yes", and then press
ENTER.
Sound Effect
You can select from SRS FOCUS, SRS or SRS TruBass.
1 Press HOME MENU.
2 Select "Sound" (/ then ENTER).
3 Select "Sound Effect" (/ then ENTER).
4 Select "SRS FOCUS", "SRS" or "SRS TruBass" (/).
5 Select the desired parameter (/).
SRS FOCUS
Selections
SRS
Selections
SRS TruBass
Selections
2
0
0
6
Main
30
 button
For stronger treble
For stronger bass
Shifts the audio balance to
the right
Listening to audio from the sub screen
using headphones
With headphones connected, you can listen to audio coming from
the sub screen when in the 2-screen or picture-in-picture mode;
audio coming from the main screen is output from the speakers.
1
2
3
4
Headphone Output
Selections
Off Deactivates SRS FOCUS
On Activates SRS FOCUS
Shifts the apparent direction of the sound
upward for more clearly defined sound
Off Deactivates SRS
On
Activates SRS
Reproduces highly effective three-
dimensional sound
Off Deactivates SRS TruBass
On Activates SRS TruBass
Provides deep, rich bass using a new
technology
Press HOME MENU to exit the menu.
Note
• (WOW) denotes a status where SRS FOCUS
® ®
SRS and SRS TruBass are on.
• You can also press (Sound Effect) on the remote to change
the selection.
• You cannot adjust the sound effect for listening with
headphones.
• If you change the sound effect with headphones connected,
the new setting will become effective as soon as you
disconnect the headphones.
• The effect of this function differs depending on signals.
Press HOME MENU.
Select "Sound" (/ then ENTER).
Select "Headphone Output" (/).
Select the desired parameter (/).
Sound Effect
Headphone Output
Sub Volume
Main Audio coming from the main screen is
(default) output from the PHONES output terminal
Sub When in the 2-screen or picture-in-picture
mode, audio coming from the sub screen is
output from the PHONES output terminal
08
®
®
®
®
®
®
®
,
Main
30
35
En