Dimm Installation; Dimm Removal - Supermicro X11DPU User Manual

Super X11DPU User's Manual

DIMM Installation

1. Insert the desired number of DIMMs into
the memory slots, starting with P1-DIMM
A1. For the system to work properly,
please use memory modules of the same
type and speed on the motherboard.
2. Push the release tabs outwards on both
ends of the DIMM slot to unlock it.
3. Align the key of the DIMM module with the
receptive point on the memory slot.
4. Align the notches on both ends of the
module against the receptive points on the
ends of the slot.
5. Use two thumbs together to press the
notches on both ends of the module
straight down into the slot until the module
snaps into place.
6. Press the release tabs to the lock positions
to secure the DIMM module into the slot.

DIMM Removal

Reverse the steps above to remove the DIMM
modules from the motherboard.
DESIGNED IN USA X11DPU
REV:1.10
BAR CODE
CPU2
JF1
Release Tabs
Press both notches
straight down into
the memory slot.
40
BIOS
LICENSE
IPMI CODE
CPU1
Notches