Sharp LC-32LE631E Service Manual page 66

LC-32LE631
LC-40LE631
LC-46LE631
Alignments (continued)
6.5.1 SSB identification
Whenever ordering a new SSB, it should be noted that the
correct ordering number (12nc) of a SSB is located on a sticker
on the SSB. The format is <12nc SSB><serial number>. The
ordering number of a "Service" SSB is the same as the ordering
number of an initial "factory" SSB.
6.6 Total Overview SAM modes
Table 6-6 SAM mode overview
Main Menu Sub-menu 1
Hardware Info A. SW version
B. Stand-by processor version e.g. "STDBY_83.84.0.0"
C. Production code
Operation hours
Errors
Reset error buffer
Alignment White point
Ambilight
Dealer options Virgin mode
E-sticker
Auto store mode
Option numbers Group 1
Group 2
Store
Initialise NVM
Store
Operation hours display
Software maintenance Software events
Hardware events
Sub-menu 2 Sub-menu 3
e.g. "Q5551_0.9.1.0 "S5551_0.9.21.0"
"STDBY_89.167.5.0"
e.g. "see type plate"
Colour temperature Normal
Warn
Cool
White point red
White point green
White point blue
Select module
Brightness
Select matrix
Off/On
Off/On
None
PDC/VPS
TXT page
PDC/VPS/TXT
e.g. "00008.00001.15421.02239"
e.g. "44816.34311.33024.00000"
0003
Display
Clear
Test reboot
Test cold reboot
Test application crash
Display
Clear
66
18310_221_090318.eps
Figure 6-1 SSB identification
Description
Display TV & Stand-by SW version and CTN serial
number
Displays the accumulated total of operation hours.TV
switched "on/off" & every 0.5 hours is increase one
Displayed the most recent errors
Clears all content in the error buffer
3 different modes of colour temperature can be
selected
LCD White Point Alignment. For values,
LCD White Point Alignment. For values, see
see Table 6-3 White tone default setting 32"
Table 6-1 White D alignment values
(Blockbuster) to 6-5 White tone default setting 40"
(Blockbuster)
Select Virgin mode On/Off. TV starts up / does not
start up (once) with a language selection menu after
the mains switch is turned "on" for the first time (virgin
mode)
Select E-sticker On/Off (USP's on-screen)
The first line (group 1) indicates hardware options 1
to 4
The second line (group 2) indicates software options
5 to 8
Store after changing
N.A.
Select Store in the SAM root menu after making any
changes
In case the display must be swapped for repair, you
can reset the ""Display operation hours" to "0". So,
this one does keeps up the lifetime of the display
itself (mainly to compensate the degeneration
behaviour)
Display information is for development purposes
Display information is for development purposes
090319