Table of Contents
Related Manuals for Solwise SAR-600
Summary of Contents for Solwise SAR-600
- Page 1 Easy Start Guide Solwise SAR-600 range ADSL2+ Routers Covers the following models using RouterTech Firmware 2.1: • Single LAN Port, SAR-600E • Four LAN Port, SAR-600ER • Four LAN Port with USB & 11g Wireless, SAR-600EW Version 2.1...
-
Page 2: Countries Of Operation And Conditions Of Use In The European Community
In Italy the end-user must apply for a license from the national spectrum authority to operate this device outdoors. · In France outdoor operation is only permitted using the 2.4 – 2.454 GHz band: Channels 1 – 7. Solwise Ltd Easy Start Page 1 of 33 www.solwise.co.uk... -
Page 3: Table Of Contents
Changes are periodically made to the information in this document. They will be incorporated in subsequent editions. The product manufacturer may take improvement and/or changes in the product described in this document at any time Solwise Ltd Easy Start Page 2 of 33... -
Page 4: Introduction
Thank you for purchasing your Solwise SR-600 ADSL router. This Quick Setup Guide covers all models in the SAR-600 range including the SAR-600E with single LAN Port, SAR-600ER with four LAN Ports, and the SAR-600EW 4-Port Ethernet USB Wireless-G ADSL Router. Solwise ADSL routers allow you to access and share high-speed broadband connection with multiple PCs using a single device wired or wireless (EW model). - Page 5 Depending on your country of purchase, your package may or may not come with an ADSL POTS Splitter. The POTS Splitter is required if you are connecting a Telephone Set to the Ethernet Modem. If not supplied then an ADSL POTS-Splitter can also be purchased from your dealer. Solwise Ltd Easy Start Page 4 of 33...
-
Page 6: Router Overview
Lights up when power is supplied to the ADSL Router. ETHERNET Lights up when the Ethernet cable is properly connected from your ADSL Router to the Ethernet Card. Flickers when the ADSL is transmitting/receiving data. Solwise Ltd Easy Start Page 5 of 33 www.solwise.co.uk... - Page 7 Use a paper clip or a pencil tip to depress the reset button, hold for at least 5secs and release. At this point, the DSL indicator will go off showing the reset is in progress. DC IN (9V) To connect to the Power Adapter that comes with your package. Solwise Ltd Easy Start Page 6 of 33 www.solwise.co.uk...
-
Page 8: Sar-600Er
Flickers when the ADSL Router is trying to establish a connection with the ADSL Service Provider (Training). Steady Green Light when the ADSL connection is established. Internet Green LED Lights up when the PPP connection is established. LED Light off when no PPP connection. Solwise Ltd Easy Start Page 7 of 33 www.solwise.co.uk... - Page 9 DC IN (9V) To connect to the Power Adapter that comes with your package. POWER SWITCH To power on or off the modem. I - indicates ON position O - indicates OFF position. Solwise Ltd Easy Start Page 8 of 33 www.solwise.co.uk...
-
Page 10: Sar-600Ew
Flickers when the ADSL Router is trying to establish a connection with the ADSL Service Provider (Training). Steady Green Light when the ADSL connection is established. Internet Green LED Lights up when the PPP connection is established. LED Light off when no PPP connection. Solwise Ltd Easy Start Page 9 of 33 www.solwise.co.uk... - Page 11 To connect to the Power Adapter that comes with your package. POWER SWITCH To power on or off the modem. I - indicates ON position O - indicates OFF position. RF Antenna 180° 2.4Ghz Wireless Antenna. Solwise Ltd Easy Start Page 10 of 33 www.solwise.co.uk...
-
Page 12: Wireless Router Connections For The Sar-600Ew
Ethernet Hub/Switch. For details on how to connect to the Ethernet Switch/Hub, please refer to the documentation that comes with the unit. With the Auto MDI/MDIX feature, both cross and straight UTP cable can be utilized. Solwise Ltd Easy Start Page 11 of 33... -
Page 13: Connecting The Your Router To Your Computer/Notebook Using A Lan Cable
8 conductors on it. Do not mistaken with the LINE Port (Picture B) that has only 6 conductors. The Ethernet Port is slightly bigger than the LINE Port. A. ETHERNET B. LINE Solwise Ltd Easy Start Page 12 of 33 www.solwise.co.uk... -
Page 14: Connecting To The Adsl Line
6.3 Checking Your Connections Please check your connections before proceeding. 6.4 Connecting to the Power Outlet Solwise Ltd Easy Start Page 13 of 33 www.solwise.co.uk... -
Page 15: Powering On
Network Neighborhood icon. Select Properties. iiii From the Configuration tab, select TCP/IP-> xxx where refers to the model of your Ethernet Card that is connected to your ADSL Router. Click Properties. Solwise Ltd Easy Start Page 14 of 33 www.solwise.co.uk... -
Page 16: For Windows ® 2000 / Windows ® Xp
(This is important especially if you have more than one Local Area Connection icons displayed at the Network and Dial-up Connections Network Connections window. Ensure that you have selected the correct one.) Select Internet Protocol (TCP/IP) and click Properties. Solwise Ltd Easy Start Page 15 of 33 www.solwise.co.uk... -
Page 17: Installing The Usb Device Driver (Sar-600Ew Model)
Windows CD-ROM. Have it ready by your side. 8.1 Installing the USB Device Driver - For Windows® 98 Second Edition Power on your computer to start Windows. Place the Installation CD into your CD-ROM Drive Solwise Ltd Easy Start Page 16 of 33 www.solwise.co.uk... - Page 18 Click CD-ROM drives option and click Next. Select The updated driver (Recommended) DSL Router USB Remote NDIS Network Device and click Next. Click Next to proceed installation with the indicated driver. Solwise Ltd Easy Start Page 17 of 33 www.solwise.co.uk...
-
Page 19: Installing The Usb Device Driver - For Windows® Me
At the following prompt, select Specify the location of the driver (Advanced) option and click Next. Click Removable Media option and click Next Click Next again to proceed installation with the indicated driver. Solwise Ltd Easy Start Page 18 of 33 www.solwise.co.uk... -
Page 20: Installing The Usb Device Driver - For Windows® 2000
You may be prompted with Digital Signature Not Found dialog box during installation. (This happens when Windows detects your driver as a new version). Click to proceed with the installation. Solwise Ltd Easy Start Page 19 of 33 www.solwise.co.uk... -
Page 21: Installing The Usb Device Driver - For Windows® Xp
(This happens when Windows detects your driver as a new version). Click Continue Anyway to proceed with the installation. viii Click Finish when prompted. Upon completion, proceed to the next chapter. Solwise Ltd Easy Start Page 20 of 33 www.solwise.co.uk... -
Page 22: Configuring Your Internet Browser
> Preferences. Select Advanced and click Proxies. Ensure that the option Direct Connection to the Internet is enabled. Click for changes to take effect. You may now proceed to the next chapters. Solwise Ltd Easy Start Page 21 of 33 www.solwise.co.uk... -
Page 23: Setting Up Your Router Via The Wizard Utility
10.1 For Windows 2000/ XP Users ONLY This chapter is only for Windows User, please use the Router Utility Installation CD provided to setup your SAR-600 Router Utility. If you are using an alternative Operating System then please refer to the Web Graphical User Interface for router setup. - Page 24 Easy Start Select the folder where you would like the setup utility to install then click on Next and then Next again to continue. Solwise Ltd Easy Start Page 23 of 33 www.solwise.co.uk...
- Page 25 Easy Start The Setup tool will now install the application… Solwise Ltd Easy Start Page 24 of 33 www.solwise.co.uk...
- Page 26 Click in Close when the installation is complete. After installation you should have a new Router Setup Tool menu item: To configure your router please now select the Router Setup Tool menu option (above): Solwise Ltd Easy Start Page 25 of 33...
- Page 27 Enter a new name for the Connection name (e.g. you could use the name of your ISP). Next, use the drop down list to select your ISP and Country. If your ISP is not specifically listed then select the default ‘UK: UK(Most ISPs)’ option. Solwise Ltd Easy Start Page 26 of 33...
- Page 28 DHCP etc… then click on Next to access those screens and change the settings. Once you are happy with the setup then click on the Setup button to copy the settings over to the router. Solwise Ltd Easy Start Page 27 of 33...
- Page 29 Setup Wizard down. If you now wish to do additional setup of the router then please select Yes to enter the web interface of the router: The configuration username and password are both ‘Admin’: Click on Log In to enter the web interface of the router. Solwise Ltd Easy Start Page 28 of 33 www.solwise.co.uk...
-
Page 30: Router Setup Via Web Interface
From your Internet Browser, key in 192.168.1.1 at the address bar and hit <Enter> Upon Login successfully, the Main home page for the router is displayed. To setup your configuration please click on the Setup tab. Solwise Ltd Easy Start Page 29 of 33 www.solwise.co.uk... - Page 31 Username and Password fields. For a basic user setup you are advised to leave the other settings as default. Click on Apply and then ‘ Save All’ (top left corner of the setup screen) to store the new settings: Solwise Ltd Easy Start Page 30 of 33 www.solwise.co.uk...
-
Page 32: Wireless Setup Via Web Interface
<Enter>. Enter the configuration Username and Password (admin by default) to enter router setup. Once you have entered the router setup then click on ‘Wireless’ to go to the wireless configuration Solwise Ltd Easy Start Page 31 of 33 www.solwise.co.uk... -
Page 33: Important Default Settings
Save All’ and Restart to store the settings. 13 Important Default Settings Section Description Default Setting Administration Config Username Admin Config Password Admin LAN Address 192.168.1.1/255.255.255.0 DHCP Server 192.168.1.2 to 192.168.1.254 Lease 3600 DHCP Relay Hostname mygateway1 Solwise Ltd Easy Start Page 32 of 33 www.solwise.co.uk... - Page 34 Easy Start DNS Proxy Enabled Mode Wireless SSID RouterTech.Org (SSID Visible) Channel Mode Mixed b/g Solwise Ltd Easy Start Page 33 of 33 www.solwise.co.uk...
Need help?
Do you have a question about the SAR-600 and is the answer not in the manual?
Questions and answers