SRAM Guide DB5 Service Manual page 11

Use a pick to remove the binder plug.
9
10 Use a T8 TORX® wrench to remove the pinch bolt.
Use the T8 TORX® wrench to push out the pivot pin.
11
12 13
Remove the lever blade from the lever body.
The lever blade has four pieces, the lever blade, the cam/push rod
assembly, a washer, and the lever return spring. To hold all pieces
together you may reinstall the lever pivot pin and gently set aside.
Pick
T8 TORX wrench
T8 TORX wrench
Lever Blade Removal 11