SPOT METERING MODE
The Spot metering mode is used to obtain the right exposure regardless
of the backlight. Place the subject in the center of the autofocus marks.
1
LCD monitor
NEXT
Control panel
Note:
• The setting will remain if HOLD is selected in Setting Reset, but will be
canceled when the batteries are taken out. (p. 70)
Downloaded From camera-usermanual.com
58
2
ESP
SPOT
SET OK
HQ
1
Open the lens barrier and
press the Menu button several
times to display the screen
shown.
2
Select SPOT using the +/–
buttons, then press the OK
button to save the setting.
•
appears on the control
panel.
• If the Menu button is pressed
while the setting is being
entered, it will be canceled and
the next setting menu will
appear.
3
Take a picture.