Table of Contents
Advertisement
SPOT METERING MODE
The Spot metering mode is used to obtain the right exposure regardless
of the backlight. Place the subject in the center of the autofocus marks.
You can select the following modes with each press of the
Spot/Macro button.
"
Digital ESP metering/Auto focus
Spot metering mode
Macro mode (p. 62)
Macro mode + Spot metering mode (p. 63)
2
Control panel
Note:
• Unless OFF is selected in All Reset, the setting will be canceled when
the power is turned off. (p. 172)
1
P
3
HQ
1
Set the Mode dial to P or A/S/M.
2
Press the Spot/Macro button
until
appears on the
control panel.
• To cancel the Spot metering
mode, press the Spot/Macro
button several times until
disappears.
3
Take a picture.
61
Advertisement
Table of Contents
