Olympus Camedia D-360L Instructions Manual page 119

FILE NUMBER DISPLAY PANORAMA MODE BEEP SOUND PROCESSING IMAGES USING SEQUENCE MODE COMPATIBILITY OF THE ERROR CODES INSTALLING PROVIDED USING A PERSONAL
CARD-PRINT
SOFTWARE COMPUTER CAMEDIA Master PICTURE DATA
You can turn the operating beep sound on or off. You can make panorama pictures. In the Sequence mode, the camera takes pictures sequentially while the You can select either the file number or the frame number to be
CARD-PRINT MENU
LCD monitor
Shutter release button is pressed. displayed.
You can process images (changing tones, composing, and so on) using
To take full advantage of a wide range of functions, including download,
1
You can select the following modes with each press of the Print button in
• Images taken by this camera may not be properly displayed with other the provided CAMEDIA Master or other application software.
Install CAMEDIA Master (provided).
display, storage and panorama, your Olympus digital camera comes with
the Display mode (lens barrier closed).
Olympus digital cameras.
software applications and CAMEDIA Master. For installation and
• Images taken by other Olympus digital cameras may not be properly
NO CARD
operation, please refer to the software's online documentation.
2
MAKING DARK IMAGES BRIGHT
displayed with this camera.
Make sure that the power of the personal computer and the
Regular display
camera are OFF before connecting.
Some images may come out darker than expected. You can try taking
pictures again right after shooting, but may often miss the right moment
CARD FULL
Date print
for a good picture. This is where CAMEDIA Master Instant Fix comes in.
3
Connect the RS-232C PC serial cable to the computer's serial
You can easily brighten images.
port.
Print reserve
WRITE-PROTECT
4
Open the Connector cover on the camera, and connect the
LCD monitor
LCD monitor
cable to the camera's Computer connector.
LCD monitor
CARD ERROR
5
LCD monitor
Turn on the personal computer.
6
Open the lens barrier on the camera to turn it on.
7
Start CAMEDIA Master on the computer.
Control panel
Note:
• Do not connect when the power of the camera is on as it may cause a
camera malfunction.
• Use of the optional AC adapter is recommended for computer
downloads.
• Camera functions will be disabled while the camera is connected to a
Note:
computer.
Note:
• When File No. is selected, the frame No. or date is not displayed.
• The computer cannot communicate with the camera when the lens
• The setting will remain even after the power is turned off until it is
• The frame No. is always displayed in the Index-Display mode even if File
barrier is closed.
readjusted.
No. is selected.
Downloaded From camera-usermanual.com Downloaded From camera-usermanual.com Downloaded From camera-usermanual.com Downloaded From camera-usermanual.com Downloaded From camera-usermanual.com Downloaded From camera-usermanual.com Downloaded From camera-usermanual.com Downloaded From camera-usermanual.com Downloaded From camera-usermanual.com Downloaded From camera-usermanual.com
There is no card in the camera. Insert a
SmartMedia card.
Mode
No more photographs can be taken. Replace the
For a regular display.
SmartMedia, erase unwanted pictures, or transfer
the data to a personal computer and free up space
For storing data for Date-Print (card). (p. 90)
in the SmartMedia.
A write-protect adhesive seal is placed on the card
For storing data for pictures to be printed.
or the card is for Display mode only. The camera
(p. 91)
cannot enter Record, Erase or Card format mode.
The camera cannot enter Record, Display or
Erase mode. If cleaning the connector does not
help or if Card format mode cannot be entered,
this card cannot be used and may be damaged.
Shutter
release
button
Overlap the left end of the picture with the right end
of the previous picture (when shooting to the right).
Error
1
1
Open the lens barrier and
Open the lens barrier and
1
press the Menu button several
press the Menu button several Open the lens barrier and Close the lens barrier and
times to display the screen
Use
times to display the screen press press the Menu button several the
shown.
ON/OFF button to turn on the shown . times to display the screen
shown. LCD monitor.
2
Select ON or OFF using the
2
Select the
+/– buttons, then press the OK
2
Press the Menu button several direction (right, left, up, down) Select SEQUENCE using the
button to save the setting.
using the +/– buttons. +/– buttons, then press the OK
times to display the screen
• If the Menu button is pressed
button to save the setting. shown.
while the setting is being
• If the Menu button is pressed
entered, it will be canceled and
3
Take pictures by overlapping while the setting is being
the next setting menu will
3
the edges of the images. entered, it will be canceled and
Select FRAME No. or FILE No.
appear.
• A maximum of 10 images can the next setting menu will
using the +/– buttons.
appear. be connected.
• appears on the control
4
panel.
Press the OK button to save
the setting.
• The camera returns to the
3
frame number display when
Take a picture.
1
Place the cursor on the
the power is turned off.
desired image and double-
click on it.
This will display the selected
image.
LCD monitor
connecting
119 117 103 99 97 89 81 63