Olympus Camedia D-360L Instructions Manual page 92

TROUBLESHOOTING (cont.) PANORAMA MODE (cont.) TROUBLESHOOTING LCD BRIGHTNESS FILE NUMBER CARD SETUP (cont.) SETTING RESET USING CAMEDIA Master (cont.) CONNECTING TO A PERSONAL PROCESSING IMAGES USING PROCESSING IMAGES USING SEQUENCE MODE (cont.) SYSTEM CHART OPTIONAL ITEMS SPECIFICATIONS SPECIFICATIONS (cont.)
CARD-PRINT (cont.)
CARD-PRINT (cont.)
TRANSFERRING DATA FROM
COMPUTER CAMEDIA Master (cont.) CAMEDIA Master (cont.)
SmartMedia
You can adjust the brightness of the LCD monitor. When the camera is connected to a computer, an error message A variety of capabilities are available when connected to optional • Photo Printers For Olympus Digital Cameras Product type Power supply You can select the file numbering system. It is especially useful when You can save your settings even after the power is turned off.
Note:
OPERATING PROBLEMS PRINT-RESERVE (CARD) (cont.) DATE-PRINT (CARD) CARD FORMAT
downloading data to a personal computer. • AC Adapter appears while data is being transferred to the computer. equipment.
Recording System
• The flash cannot be used in the Sequence mode.
Use the appropriate connector according to your computer's platform.
1
• Camera Case The cable is not plugged in correctly.
The camera does not work. You can store data for printing the date with pictures. (p. 88)
• This mode can only be used in the SQ mode (automatically set).
PC CARD ADAPTER
Note:
Memory • Standard SmartMedia Card (8/16/32/64MB) [ Connect the cable correctly. (P. 98)
1
The power is OFF. 2
• Since the shutter speed in the Sequence mode is set to 1/30 second
About the File No. and Folder No.
• The data will remain in the card until the setting is changed. c IBM PC/AT compatible
The picture data in the SmartMedia can be directly transferred to a
2
• Special Function SmartMedia Cards The power is OFF.
max. to prevent camera movement, the resulting picture may be darker
[ Open the lens barrier to turn on the power. (P. 31)
• RESET erases all of the selections.
Dimensions Connect the provided RS-232C PC serial cable to the D-SUB 9-pin
personal computer equipped with a PC card (PCMCIA) slot or an
No. of storable frames
than expected. The file number and folder number used for each image are expressed
[ Template Card (4MB) Open the lens barrier. (P. 31)
2
The batteries are loaded incorrectly.
• Functions may not work fully depending on the printer or the lab used. COM 1 or COM 2 serial port on your computer.
• The Sequence mode will be canceled when the power is turned off.
external PC card reader/writer, using the optional PC Card Adapter.
3
as shown.
The batteries are exhausted. Calendar Card (4MB)
[ Reload the batteries correctly. (P. 25)
• It may take a while to store data in the card.
• It will take approx. 10 seconds to record the pictures taken. Weight
[ Title Card (4MB) Replace the batteries with new ones (P. 25) or use the optional
3
The batteries are exhausted.
SmartMedia
• FlashPath Floppy Disk Adapter AC adapter (P. 27).
[
Replace the batteries with new ones. (P. 25)
4
• PC Card Adapter The serial port is not selected correctly.
4
The batteries are temporarily unable to function.
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT ANY NOTICE OR
TRANSFERRING DATA USING CAMEDIA
• NiMH Batteries [ Use the operating system software to make sure the serial port is
OBLIGATION ON THE PART OF THE MANUFACTURER. [
Keep the batteries warm while using the camera.
Erase
TV
5 • NiMH Battery Charger selected correctly.
Master The camera is set to the stand-by mode.
Image pickup element
5
There is no available serial port.
[
Close and open the lens barrier. (P. 31)
CAMEDIA Master transfers images stored in the card to your computer.
*Month: Jan. ~ Sep. = 1-9, Oct. = A, Nov. = B, Dec. = C
[ Make one available by following the computer's instructions.
6
The camera is connected to a personal computer.
COMPOSING IMAGES WITH TEMPLATES
Recording image
1
LCD monitor
[
The camera does not work when connected to a computer. (P. 99)
You can easily compose images with templates in CAMEDIA Master.
PROBLEMS WITH IMAGES
The File No. and Folder No. in Each Mode
FlashPath FLOPPYDISK ADAPTER
AC adapter
No picture is taken when the Shutter release button is pressed. LCD monitor
White balance
The picture is out of focus.
c Apple Macintosh or compatible
LCD monitor
• NAME RESET
1
The flash has not finished charging or the previous picture is being
The picture data in the SmartMedia can be directly transferred to a
1
The camera moved when the shutter button was pressed.
Attach the optional conversion connector for Macintosh to the printer
LCD monitor
When NAME RESET is selected, the file number and folder number will
written into the card.
Lens
personal computer equipped with a 3.5" FDD, using the optional
[ Hold the camera correctly, and press the shutter button. (P. 35/36)
serial port or modem serial port on your computer, and then connect
be reset every time a card is inserted in the camera.
[
Remove your finger from the Shutter release button and wait until
FlashPath Floppydisk Adapter.
2
The viewfinder's autofocus mark was not positioned on the subject.
the RS-232C PC serial cable. (Turn off AppleTalk if connected to
CORRECTING BLURRY IMAGES
the Green lamp stops blinking. (P. 40/49)
NOTES ON DISPLAY AND
[ Position the autofocus frame on the subject, or use the focus lock.
the printer port.)
Photometric system 2
There is no card in the camera or there is a problem with the card.
(P. 40/45)
The optional Macintosh conversion connector allows you to connect
Backlight sometimes makes the whole image blurry, and an object which
BACKLIGHT
[
See the Error code chart. (P. 117)
3
The lens is dirty.
your camera to a Macintosh computer. It cannot be used to connect a
stands before the subject may be out-of-focus. Use CAMEDIA Master
Exposure control
3
The card is full.
[ Clean the lens with a soft dry cloth.
Macintosh to a printer.
Sharpen when this happens to sharpen the whole image. However, you
Aperture*
[
Replace the card, delete unwanted pictures or transfer the data to
4
• The Control panel and the fluorescent lamps used in the LCD monitor The mode was not selected correctly.
should note that it doesn't wipe out image blur thoroughly.
Shutter* Macintosh
a computer and delete all of the pictures. (P. 28/76/82/97)
[ Shoot with the Macro mode when the subject is within the range
have a limited service life. If they begin to darken or flicker, contact your
• AUTO FILE
Note:
4
The batteries ran out.
of 4"~20". For further distances, shoot with the Standard mode.
nearest service center.
• The Panorama mode is available only when an Olympus brand Standard
When AUTO FILE is selected, the same folder number and a continuing
[
Replace the batteries with new ones. (P. 25)
(P. 48/53)
• In cold conditions, the display backlight may be slow to come on or may
memory card is used.
number from the last file number of the last card will be used, so that the
Working range 5
The battery power is low.
5
change color suddenly. To avoid this, keep the camera warm when The Shutter release button was pressed right in front of the camera in
• The flash cannot be used in the Panorama mode.
same file number will not be used for pictures taken together and saved
[
Replace the batteries with new ones. (Do not open the Battery
• Because the focus, the exposure, and the white balance are determined using in cold temperatures. Backlight performance will return to normal the Selftimer mode.
in multiple cards.
compartment cover when the Card access lamp is blinking.) (P. 25)
by the first picture, do not shoot overly bright/dark subjects such as the
[ Press the Shutter release button while looking into the viewfinder,
under normal temperature conditions.
6
A write-protect adhesive seal is placed on the card or there is no card
sun in the first frame.
not while standing in front of the camera. (P. 55)
• When the color LCD monitor shows different pictures, some pixels may
Note:
in the camera.
• Use of the SQ mode is recommended to save memory.
Note:
6
The flash mode was set to Red-Eye Reducing flash, Off, Slow
not change color and remain on or off. This phenomenon may be due
Note
• Check for compatibility. This equipment may not function properly on all
• Panorama images must be assembled on a computer. Follow directions [
Note:
• Set the date beforehand. Insert a new card in the camera. (P. 28)
to a lag in some circuits, but is considered to be within the normal Shutter Synchronization flash or Red-Eye Reducing flash + Slow
• You can view images using software such as graphics applications that
operating systems.
carefully for the supplied panorama application to successfully assemble
• Even when HOLD is selected, the settings for Exposure compensation
• Pictures taken after this function is selected will not be printed. 7
The camera is in the Display mode.
Shutter Synchronization flash in a situation where the use of the flash
operating tolerances of the LCD monitor. In addition, the brightness of
support JPEG like Paint Shop Pro/Photoshop, Internet browsers like
• Do not use a SmartMedia with Write-protect adhesive seal on a
Note:
panorama images. (p. 57), Spot metering mode (p. 58), White balance (p. 61) and ISO (p.
Note:
• When using the P-330N/P-330 printer, Date-Print must be set on the
[
Open the lens barrier. (P. 31)
Netscape Communicator/Microsoft Internet Explorer, and CAMEDIA is necessary.
the color LCD monitor may vary between pictures.
computer as it will cause errors. (Refer to the instructions of the
• When a picture is taken in the TIFF (non-compression) recording mode, • In order to prevent battery consumption, the use of the optional AC
62) will be canceled and returned to the default when the batteries are
• The setting will remain even after the power is turned off until it is printer.
Master (supplied with the camera).
adapters.) [ It takes time before the shutter is released in these flash modes.
adapter is recommended.
it will be recorded in the SHQ (JPEG) mode.
taken out. readjusted.
• It may take a while to store data in the card.
Hold the camera securely or use a tripod. (P. 49)
Downloaded From camera-usermanual.com Downloaded From camera-usermanual.com Downloaded From camera-usermanual.com Downloaded From camera-usermanual.com Downloaded From camera-usermanual.com Downloaded From camera-usermanual.com Downloaded From camera-usermanual.com Downloaded From camera-usermanual.com Downloaded From camera-usermanual.com Downloaded From camera-usermanual.com Downloaded From camera-usermanual.com Downloaded From camera-usermanual.com Downloaded From camera-usermanual.com Downloaded From camera-usermanual.com Downloaded From camera-usermanual.com Downloaded From camera-usermanual.com Downloaded From camera-usermanual.com Downloaded From camera-usermanual.com Downloaded From camera-usermanual.com
98 114 118 64 84 116 106 92 102 112 120 100 90 104 86 122
Printer (P-330N/P-330)
3
DOS/V
D-SUB 9-pin
serial port
3
2
Camera
+
Serial port
Conversion connector
for Macintosh
Camera
4
Press
to can
: This camera uses four AA nickel metal : Digital camera (for shooting and displaying)
4
Place the cursor on the
hydride batteries, AA lithium batteries, AA
: Digital recording (JPEG/TIFF with "Design
This will sharpen the selected
2
desired image and double-
alkaline batteries or AA NiCd batteries. Do
Select [Image] - [Instant Fix]
rule for Camera File system" support)
image.
1
click on it.
not use manganese batteries.
1
Open the lens barrier and on the menu bar.
: 3V (3.3V) SmartMedia 2MB, 4MB, 8MB,
Close the lens barrier and
Exclusive AC adapter (optional)
This will magnify and display the
press the Menu button several
16MB, 32MB, 64MB
This will brighten the selected
Close the lens barrier and
press
: 5" (W) x 2.6" (H) x 1.9" (D)
selected image. times to display the screen
Close the lens barrier and press
: Approx. 2 shots (TIFF/8MB) image.
press
ON/OFF button to turn on the
shown.
(128 x 65 x 47 mm)
the Print button to display the
: Approx. 18 shots (SHQ/8MB)
ON/OFF button to turn on the
LCD monitor.
screen shown.
: 8.3 oz (235 g) (without batteries/card)
2
: Approx. 36 shots (HQ/8MB)
LCD monitor.
Select RESET or HOLD using
FlashPath
: Approx. 32 shots (SQ-HIGH/8MB)
the +/– buttons, then press the
2
: Approx. 122 shots (SQ-NORMAL/8MB) OK button to save the setting.
Press the Menu button several
Select DATE or TIME using
• If the Menu button is pressed
the +/– buttons. Press the Menu button several
: One-frame erase / All-frames erase
times to display the screen
PC card
while the setting is being
times to display the screen
: 1/2.7 inch CCD solid-state image pickup shown.
adapter
entered, it will be canceled and
shown.
: 1,310,000 pixels (gross)
the next setting menu will
Press the OK button to save
: 1280 x 960 pixels
appear.
the setting.
RS-232C PC
3
(HQ/SHQ/TIFF modes) Select the brightness using
serial cable • If the Print button is pressed
Select
the +/– buttons.
: 640 x 480 pixels (SQ mode)
1
With RESET selected, the settings while the setting is being
Start CAMEDIA Master on the
• Press the + button to lighten
buttons and press the OK
: Full auto TTL, Preset (daylight, overcast,
entered, it will be canceled and
of the following items will be
computer.
the display and the – button to
button.
tungsten light, fluorescent light)
the next setting menu will
canceled and reset to the default
darken it.
• If the Menu button is pressed
appear.
: Olympus lens 5.5 mm, F2.8, 5 elements in 4
when the power is turned off.
while the setting is being
• If the LCD monitor ON/OFF
groups (equivalent to 36-mm lens on 35-mm
entered, it will be canceled and
button is pressed while the
camera), aspherical glass
Flash modes (p. 49),
4
the next setting menu will
setting is being entered, it will
Press the OK button to save
: TTL Center weighted average metering
Exposure compensation (p. 57),
appear.
be canceled and the LCD
the setting.
system, Spot metering system
Spot metering mode (p. 58),
monitor will be turned off.
• If the Menu button is pressed
: Program auto exposure
2
White balance (p. 61), Select [Camera] - [Download
while the setting is being
: F2.8, F5.6, F11
4
ISO (p. 62), All Images] on the menu bar.
entered, it will be canceled and
Press the OK button again
: 1/2 ~ 1/500 sec.
1
the next setting menu will
Setting reset (p. 70)
The
with YES selected to perform
Place the cursor on the image
(used with mechanical shutter)
appear.
transferring images from the
Card format.
you want to compose and
* Manual setting not available
• When complete, NO PICTURE camera to the computer.
double-click on it.
: 4" ~ 20" (0.1 m ~ 0.5 m) (Macro mode)
appears on the LCD monitor.
This will display the selected
20" ~ ∞ (0.5 m ~ ∞ ) (Standard mode)
image.
TV
the LCD
the LCD
MO drive
Computer connector
Personal
computer
using the +/–
Modem
=
computer will
Modem
Computer connector
RS-232C PC serial
cable
Personal computer
monitor
monitor
start