Olympus Camedia D-360L Instructions Manual page 25

W A RNING
WARNING
BA TTER
USING THE AC ADAPTER (Optional) ADJUSTING THE DATE AND TIME LEARNING THE BASICS FOCUS LOCK USING THE FLASH SELFTIMER EXPOSURE COMPENSA WHITE BALANCE LOADING THE BATTERIES MACRO MODE
n
4. DO NOT LEAVE THIS CAMERA WITHIN THE REACH OF INFANTS OR 16. Damage Requiring Service — If using the optional AC adapter, unplug 1. Read Instructions — All the safety and operating instructions should be In addition to automatic exposure, you can also adjust it manually by +/– You can adjust the date and time. This camera uses four AA nickel metal–hydride batteries, AA alkaline An optional Olympus AC adapter allows you to power your digital camera If your main subject is not within the autofocus marks, follow the Select the flash mode according to the shooting conditions. You can get as close as 4" to your subject. An approx. 3" x 4.7" subject You can match the white balance to the light source by selecting Auto,
Use a tripod to hold the camera securely
TURNING ON THE POWER
CHILDREN. read before the product is operated. this product from the wall outlet and refer servicing to qualified service
procedure below to obtain focus. This is called focus lock. 2 (approx. 0.5 steps). Adjust + when the subject is mostly bright. Adjust – can be photographed fully within the frame. from a common AC wall outlet. batteries, AA lithium batteries or AA NiCd batteries. (Daylight),
• Keep the batteries away from children.
• THE CHILD MIGHT PUT THE STRAP AROUND HIS OR HER NECK. personnel under the following conditions:
2. Retain Instructions — The safety and operating instructions should be
when the subject is mostly dark. light). Performance will be limited with alkaline batteries, especially in low
• If a battery is swallowed, see a doctor immediately.
This camera uses four AA NiMH batteries, AA alkaline batteries, AA
THIS COULD CAUSE STRANGULATION OR CHOKING.
1. DO NOT ALLOW BATTERIES TO COME IN CONTACT WITH WATER
a) If liquid has been spilled, or objects have fallen into the product. retained for future reference.
1
temperatures. NiMH batteries are recommended.
• Dispose of used lithium batteries promptly, in a safe manner that
lithium batteries or AA NiCd batteries.
• THE CHILD MIGHT SWALLOW BATTERIES OR SMALL
2
OR SEA WATER.
3. Heed Warnings — All warnings on the product and in the operating b) If the product has been exposed to rain or water.
complies with all applicable laws. Do not use manganese batteries; they may overheat and destroy the
1
2 3 1
n Performance will be limited with alkaline batteries, especially in low ATTACHMENTS. IF THIS HAPPENS, CONTACT A PHYSICIAN
2. DO NOT USE BATTERIES THAT ARE NOT DESIGNATED FOR USE
instructions should be adhered to.
Viewfinder
• The lithium battery may present the risk of fire or chemical burn if
c) If the product does not operate normally by following the operating
camera.
temperatures. NiMH batteries are recommended. IMMEDIATELY.
WITH THIS CAMERA.
1
mishandled.
4. Follow Instructions — All operating and use instructions should be instructions. Adjust only those controls that are covered by the
• THE CHILD MIGHT ACTIVATE THE FLASH FROM TOO CLOSE AND
3. DO NOT THROW BATTERIES INTO FIRE, EXPOSE THEM TO HEAT,
n AA manganese batteries or a CR-V3 lithium battery pack cannot be
• Do not recharge, disassemble, heat above 212°F (100°C) or dispose of in
followed. operating instructions as an improper adjustment of other controls
CAUSE DAMAGE TO HIS OR HER EYES.
OR SHORT-CIRCUIT OR DISASSEMBLE THEM.
used.
a fire.
may result in damage and will often require extensive work by a
5. Cleaning — Unplug this product from the wall outlet before cleaning. Do
• THE CHILD MAY BE INJURED. You can select the following flash modes with each press of the Flash
4. DO NOT USE OLD AND NEW OR CHARGED AND UNCHARGED
n Use the batteries correctly. Incorrect use can cause fluid leakage, heat
• Before use, wipe the battery clean with a dry soft cloth to assure good
qualified technician to restore the product to its normal operation.
not use liquid cleaners or aerosol cleaners. Use a damp cloth for
5. BATTERY FLUID MAY LEAK, GENERATING HEAT AND POSSIBLY
mode button. BATTERIES,
generation, or other damage. When replacing batteries, be sure to
contact.
cleaning. d) If the product has been dropped or damaged in any way.
CAUSING A FIRE OR EXPLOSION.
CAPACITIES/KINDS/BRANDS MIXED TOGETHER.
load them correctly.
• Never use metallic tweezers to hold the battery, and never short circuit Control panel
6. Attachments — Attachments not recommended by the product e) When the product exhibits a distinct change in performance — this
• DO NOT USE NON-RECOMMENDED BATTERIES.
5. DO NOT CHARGE UNCHARGEABLE ALKALINE OR LITHIUM
the (+) and (–) sides of the battery.
n The batteries may be temporarily disabled when exposed to cold
manufacturer may be hazardous and/or cause damage to the product. indicates a need for service.
• DO NOT THROW BATTERIES INTO A FIRE, OR EXPOSE TO HEAT. fl
BATTERIES. Auto-Flash (p. 50)
temperatures. Try to keep the camera and batteries warm when using
Do not use these attachments.
• DO NOT DISASSEMBLE THE UNIT WITH BATTERIES INSIDE.
17. Replacement Parts — When replacement parts are required, be sure the
6. DO NOT LOAD OR USE BATTERIES WITH THEIR +/– TERMINALS
Windows ® is a registered trademark of Microsoft Corporation.
the camera in a cold environment. Batteries that are weak in cold
Autofocus mark
• DO NOT USE NEW BATTERIES AND OLD BATTERIES TOGETHER.
7. Water and Moisture — Do not use this product near water — for service technician has used replacement parts specified by the
UPSIDE DOWN.
Warning:
™
Macintosh
temperatures will be restored under normal temperatures.
Control panel
LCD monitor
Red-Eye Reducing Flash (p. 50) Significantly reduces the
DO NOT MIX DIFFERENT TYPES OF BATTERIES OR DIFFERENT
manufacturer or which have the same characteristics as the original part. example, near a bath tub, kitchen sink, or laundry tub, in a wet
7. DO NOT USE BATTERIES IF THEIR BODY IS NOT COVERED BY THE
All other brand names and product names are registered.
Incorrect use may cause a fire or electric shock.
n Sweat, oil, etc. can prevent a battery's terminals from making
LCD monitor
MANUFACTURERS' BATTERIES.
basement, near a swimming pool or rain. Unauthorized substitutions may result in fire, electric shock, or other
INSULATING SHEET OR IF THE SHEET IS TORN AS IT MAY CAUSE
• Be sure to use an Olympus AC adapter. Olympus is not
electrical contact. To avoid this, wipe both terminals before loading the
• DO NOT CHARGE ALKALINE AND LITHIUM BATTERIES.
hazards.
FLUID LEAK, FIRE OR INJURY. 2
8. Accessories — Do not place this product on an unstable stand, tripod,
battery.
responsible for any damage caused by the use of other kinds of
Legal and other notices
• KEEP UNLOADED BATTERIES OUT OF THE REACH OF INFANTS
8. IF NiMH BATTERIES ARE NOT CHARGED WITHIN THE SPECIFIED
18. Safety Check — Upon completion of any service or repairs to this bracket, table, or cart. The product may fall, causing serious injury to a
LCD monitor LCD monitor
Flash Off (p. 51)
WB
n Keep spare batteries on hand when going on a long trip. New AC adapters.
• All contents of this publication are subject to change without notice.
AND CHILDREN. IF AN INFANT OR CHILD SWALLOWS THE
TIME, STOP CHARGING.
product, ask the service technician to perform safety checks to determine child or adult, and serious damage to the product. Use only with a tripod,
batteries may be difficult or impossible to obtain abroad.
• Although the contents of this publication have been carefully checked to
BATTERIES, CONTACT A PHYSICIAN IMMEDIATELY. • Use an AC 120V power source.
9. DO NOT USE BATTERIES IF A FLUID LEAK, CHANGE OF
that the product is in proper operating condition. stand, or bracket. Any mounting of the product should follow the
avoid errors, some may still occur. If you are in doubt about any points or
• DO NOT LOAD THE BATTERIES IN THE OPPOSITE DIRECTION TO
n When using NiMH batteries or NiCd batteries, make sure to charge
COLOR/SHAPE OR OTHER ABNORMALITY IS FOUND. • NEVER connect or disconnect the AC adapter with wet hands.
manufacturer's instructions, and should use a mounting accessory
19. Heat — The product should be situated away from heat sources such as
Fill-In Flash (p. 51)
find mistakes or omissions, please contact us.
THAT SHOWN IN THESE INSTRUCTIONS.
them fully with the correct battery charger.
10. STORE AND USE BATTERIES OUT OF CHILDREN'S REACH. IF A
recommended by the manufacturer. • If the cord of the AC adapter is hot, smells like smoke or is
radiators, heat registers, stoves, or other products (including amplifiers)
• No part of this publication may be reproduced or reprinted except for
• NEVER USE ANY BATTERY WHOSE BODY IS NOT COVERED BY
CHILD SWALLOWS BATTERIES, CONTACT A PHYSICIAN
n Read instructions carefully before handling NiMH batteries or NiCd
emitting smoke, unplug it immediately and contact your nearest
9. Power Sources — This product should be operated only from the type of that produce heat.
personal use without the prior permission of Olympus.
THE INSULATING SHEET.
IMMEDIATELY.
batteries.
power source indicated on the label. If you are not sure of the type of
Slow Shutter Synchronization
authorized Olympus service center.
• Olympus makes no representations or warranties regarding any damages,
NEXT
6. DO NOT STORE THE CAMERA IN HUMID OR DUSTY PLACES. THIS
11. IF BATTERY FLUID GETS ON SKIN OR CLOTHES, SOAK IT WITH
n NEVER use any battery whose body is not covered by the insulating power supply to your home, consult your product dealer or local power
Flash (p. 52)
• Make sure that the camera power is off before connecting or
or benefit expected by using this unit lawfully, or any request from a third
MAY CAUSE FIRE OR ELECTRIC SHOCK.
CLEAN WATER AS IT MAY BURN THE SKIN.
Control panel
company. For products intended to operate from battery power, or other sheet, as it may cause a fire or injury.
disconnecting the AC adapter.
Control panel
person, which are caused by the inappropriate use of this unit.
7. DO NOT COVER THE FLASH WITH YOUR HAND DURING
12. DO NOT MODIFY THE BATTERY COMPARTMENT ON THE CAMERA
Red-Eye Reducing Flash +
sources, refer to the operating instructions.
NEXT
n Recommended Temperature when Using NiMH Batteries
• Make sure the AC adapter is properly plugged into the outlet.
• Olympus makes no representations or warranties regarding any damages
OPERATION. DO NOT TOUCH THE FLASH AFTER FIRING IT
OR INSERT FOREIGN OBJECTS IN IT.
Slow Shutter Synchronization
Operation: 32 ~ 104°F, Charge: 32 ~ 104°F, Storage: -4 ~ 86°F
or any benefit expected by using this unit lawfully which are caused by
CONTINUOUSLY. YOU MAY GET BURNED. • When disconnecting, hold the body, not the cord, of the AC
Flash (p. 52)
erasing the picture data.
(Usage outside this temperature range may limit battery performance
8. IF YOU DROP THE CAMERA IN WATER OR GET WATER INSIDE IT,
adapter. Never pull, bend, twist or modify the cord.
• Olympus reserves all rights to this manual. or shorten battery life. Unload batteries from the camera when not in
UNLOAD THE BATTERIES IMMEDIATELY AND CONTACT YOUR
• If there is any damage on the cord or if there is a contact failure,
Flash working range: use.)
NEAREST OLYMPUS SERVICE CENTER. LEAVING BATTERIES IN A
Note:
stop using it and contact your nearest authorized Olympus
WET CAMERA MAY CAUSE FIRE OR ELECTRIC SHOCK.
Note:
• The setting will remain if HOLD is selected in Setting Reset, but will be
service center.
Note:
• NEVER open the card cover, eject the card, remove the batteries, or pull
Note:
canceled when the batteries are taken out. (p. 70)
• Keep the AC adapter disconnected when the camera is not in
Important
• The flash is being charged while the Green lamp is blinking. Wait until
Note: the plug while the camera is in operation. It may destroy the data in the
• When using the flash in the Macro mode, the flash may not have the
• Although the brightness of the LCD monitor can be changed with the
use.
• "Note" indicates information you should be aware of.
the Green lamp goes off to take the picture.
• Select AUTO in normal situations.
card.
proper effect. Confirm the result using the LCD monitor. Do not use the exposure compensation, it may not appear to change when the subject is
• Actual product may differ slightly from that shown in illustrations.
• When using the flash in the Macro mode, the flash may not have the
• The Preset white balance may not work under special lighting.
• If you do not operate the camera for three minutes, the camera will be
flash when the subject is closer than 8".
Note: mostly dark. In such a case, display the recorded picture on the LCD
proper effect. Confirm the result using the LCD monitor.
Note:
• The setting will remain if HOLD is selected in Setting Reset, but will be set to the stand-by mode. After four hours in the stand-by mode, the
• Using the LCD monitor as a viewfinder makes it easy to take close-up monitor to check its brightness.
• The Selftimer is disengaged when the shutter is released.
• The flash cannot be used in the Sequence mode or in the Panorama
• If the Green lamp blinks, the focus or exposure is not locked. Check the canceled when the batteries are taken out. (p. 70)
power turns off automatically. (Time varies depending on the type of
pictures.
• The exposure compensation may not work properly when shooting with
• To cancel the Selftimer after it has been activated, press the Selftimer
mode. (p. 63/65)
working distance. (p. 48)
• Confirm results in the Display mode. batteries used.)
• The Macro mode will be canceled when the power is turned off. the flash.
button again.
• The setting will remain if HOLD is selected in Setting Reset. (p. 70)
Downloaded From camera-usermanual.com Downloaded From camera-usermanual.com Downloaded From camera-usermanual.com Downloaded From camera-usermanual.com Downloaded From camera-usermanual.com Downloaded From camera-usermanual.com Downloaded From camera-usermanual.com Downloaded From camera-usermanual.com Downloaded From camera-usermanual.com Downloaded From camera-usermanual.com Downloaded From camera-usermanual.com Downloaded From camera-usermanual.com Downloaded From camera-usermanual.com Downloaded From camera-usermanual.com Downloaded From camera-usermanual.com Downloaded From camera-usermanual.com
Y HAND
(Overcast),
AC wall outlet
3
2
3
2
AC adapter 2 3
connector
2
AC adapter
OR
Flash mode
SQ SQ
SLOW SLOW
SHQ
ISO ISO
2
is a trademark of Apple Computer Inc.
WB WB
HQ
AUTO
0
SET OK
SET OK
HQ
3
HQ
WB
Approx. 8"~9.8 ft
.
(Tungsten light) or
Control panel
Flash mode 1
1
1
Open the lens barrier
Close the lens barrier, press
To turn on the camera in the
button
1
1
Note:
Open the lens barrier
Record mode (p. 39 ~ 70), the LCD monitor ON/OFF Position your subject within
1 1
• Olympus 3V adapter cannot be
Open the lens barrier and Open the lens barrier and
the autofocus marks, and slide open the lens barrier on
button, then press the Menu
2
used.
press the Menu button several Press the Selftimer button. press the Menu button to
the camera. press the Shutter release
button several times to
• When in use for long periods, the
2
Press the Macro/Digital Tele times to display the screen display the screen shown • appears on the control
button halfway. • The remaining battery power,
AC adapter may get warm. This
display the screen shown.
1
shown . button to turn on the LCD panel.
number of storable pictures
Make sure that the camera
is normal.
• The Green lamp next to the
BATTERIES monitor in the Macro mode.
power is off. and selected recording mode
2
viewfinder lights.
Select the date order using
2
• appears on the control
Make an adjustment using the will be displayed on the control
3 2
the +/– buttons, then press the
Aim at your subject, and press Select the white balance using
panel.
+/– buttons, then press the OK panel.
Automatically fires in low-light
2
the Shutter release button. OK button. the +/– buttons, then press the
button to save the setting. Set the battery compartment
and backlight conditions.
2
• The shutter will be released OK button to save the setting.
To turn on the camera in the open/close lever to
• If the Menu button is pressed
3
3
• If the Menu button is pressed about 12 seconds after the
Press the +/– buttons to adjust Display mode (p. 71 ~ 86), Take a picture. the cover.
while the setting is being
while the setting is being Shutter release button is
phenomenon of "red-eye"
press
the first setting, then press
entered, it will be canceled and
2
(subject's eyes appearing red).
Recompose the picture while
pressed. (The Selftimer signal entered, it will be canceled and
ON/OFF button with the lens
the next setting menu will
the OK button. Repeat until
keeping the Shutter release
lights for 10 sec. and blinks for the next setting menu will
3
barrier closed.
appear.
Insert the new batteries
Never fires.
the last setting is adjusted,
button pressed halfway.
2 sec.) appear.
correctly as shown and close
• appears on the control
then press the OK button to
• WB appears on the control
Shooting Range: Approx. 4" ~ 20"
the battery compartment cover
panel.
save the setting.
panel when a setting other
Fires regardless of available
tightly.
3
• If the Menu button is pressed
Press the Shutter release
light. than AUTO is selected.
• Do not press the edge of the
button fully to take the
while the setting is being
battery compartment cover.
For taking photographs
picture.
entered, it will be canceled and
of night views.
SLOW
the next setting menu will
For taking photographs of
appear.
people at night.
• If the LCD monitor ON/OFF
button is pressed while the
SLOW
setting is being entered, it will
be canceled and the LCD
monitor will be turned off.
TION
(Fluorescent
.
HQ
.
OF DIFFERENT
Use
to open
the LCD monitor
.
61 57 55 53 49 45 3 3