Olympus Camedia D-360L Instructions Manual page 24

Hide thumbs Also See for Camedia D-360L:
Table of Contents

Advertisement

PRINTI
CAUTIO
ADJUSTING THE DATE AND TIME
LEARNING THE BASICS (cont.)
WORKING RANGE
USING THE FLASH (cont.)
USING THE FLASH (cont.)
RECORD MENU
SELECTING THE RECORDING MODE
LEARNING THE BASICS (cont.)
TAKING PICTURES (cont.)
CONTENTS
DIGIT AL TELE MODE
CONTENTS (cont.)
ATTACHING THE STRAP
INSERTING SmartMedia
LEARNING THE BASICS (cont.)
LOADING THE BATTERIES
CHECKING THE CONTENTS
NAMES OF PARTS (cont.)
Danger:
(cont.)
(cont.)
(cont.)
10. Grounding or Polarization — This product,when used with an optional AC
Insert the SmartMedia card in the direction shown.
The subject can be photographed (cropped to appear) twice as large.
Important safety instructlons.......................................................2
You can select the following modes with each press of the Menu button
Camera
Attach the strap to the strap hole on the camera.
Close-up Correction
FOR SAFE USE
4
CHECKING THE CARD
PROPER SHUTTER RELEASE
CHECKING THE NUMBER OF STORABLE
SLOW SHUTTER SYNCHRONIZA
AUTO-FLASH
QUICK VIEW
adapter, may be equipped with a polarized alternating-current line plug (a
CAUTION
in the Record mode (lens barrier open).
For safe use............................................................................8
The viewfinder's picture frame shows the area that can be shot for
Green lamp (P. 40)
Printing pictures........................................................................88
Note:
PICTURES
FLASH
plug having one blade wider than the other). This plug will fit into the
Battery handling......................................................................8
Mode
When the power is turned on in the Record mode, the camera checks
In the Auto-Flash mode, the flash will fire automatically in low-light and
subjects at ∞ . However, the picture area will move lower in the viewfinder
You can immediately shift from the Record mode to the Display mode,
• Make sure that the power is off before loading the batteries.
power outlet only one way. This is a safety feature. If you are unable to
1. IF YOU NOTICE AN UNUSUAL SMELL, NOISE, OR SMOKE EMITTING
Card print..................................................................................89
1. DO NOT APPLY PHYSICAL SHOCK TO BATTERIES.
Handling ...............................................................................10
the SmartMedia card.
backlight conditions.
as you get closer to the subject. At 8" (0.2 m), the shaded area is the
Mode
and check the picture you have just taken.
The flash will fire automatically during the first half of a slow shutter
SQ
When the power is turned on in the Record mode, the number of storable
• Do not touch the inside of the battery compartment.
insert the plug fully into the outlet, try reversing the plug. If the plug
FROM THIS CAMERA, UNLOAD THE BATTERIES CAREFULLY TO
Viewfinder (P. 40)
2. DO NOT USE OLD AND NEW OR CHARGED AND UNCHARGED
Card print menu ....................................................................89
Care and storage ..................................................................12
actual available image area. In this case, the subject should be
speed's release duration. It is especially great for taking photographs of
• If the camera is left without batteries for approx. one hour, all the settings
should still fail to fit, contact your electrician to replace your obsolete
AVOID BEING BURNED. (WHEN UNLOADING BATTERIES, DO IT
pictures will appear on the control panel.
BATTERIES,
HQ
Date-print (card)....................................................................90
Standard mode
Battery handling....................................................................13
positioned below the close-up correction marks.
will reset to the default.
outlet.
night views.
OUTSIDE AWAY FROM FLAMMABLE OBJECTS, AND DO NOT TOUCH
CAPACITIES/KINDS/BRANDS MIXED TOGETHER.
Warning: Ignoring this Warning mark and operating this product
2
Print-reserve (card)...............................................................91
Control
SHQ
Main features............................................................................17
• Read "BATTERY HANDLING" on page 8/13.
BATTERIES WITH YOUR BARE HANDS.) CONTACT YOUR NEAREST
11. Power-Cord Protection — Power-supply cords should be routed so that
3. WHEN CHARGING NiMH BATTERIES, CHARGE ALL FOUR
Strap
Control panel
panel
Printing with the P-330N/P-330 ................................................93
OLYMPUS SERVICE CENTER IMMEDIATELY.
Exposure compensation
BATTERIES AT THE SAME TIME.
they are not likely to be walked on or pinched by items placed upon or
Caution:
3
2. NEVER ATTEMPT TO DISASSEMBLE THIS CAMERA. IT CONTAINS
Caution: Ignoring this Caution mark and operating this product
PREPARATION......................................................19
4. CHARGE NiMH BATTERIES BEFORE USING THEM FOR THE FIRST
against them, paying particular attention to cords at plugs, convenience
5
• The adjusted date will be canceled when the camera is left without
USING A PERSONAL COMPUTER ......................95
HIGH-VOLTAGE CIRCUITRY THAT MAY CAUSE ELECTRIC SHOCK
TIME OR AFTER NOT USING THEM FOR A LONG TIME.
receptacles, and the point where they exit from the product.
Checking the contents ..............................................................20
batteries for approx. one hour (based on our tests). In such a case,
These batteries cannot be used.
Viewfinder
Spot metering mode
AND INJURY.
Computer system requirements ...............................................96
5. KEEP BATTERIES UNLOADED WHEN NOT IN USE FOR A LONG
12. Lightning — For added protection for this product when used with an
Names of parts .........................................................................21
adjust the date again.
3. DO NOT OPERATE THE CAMERA WITH WET HANDS AS YOU MAY
TIME, AS IT MAY CAUSE FLUID LEAK OR HEAT GENERATION.
Installing provided software ......................................................97
optional AC adapter during a lightning storm, or when it is left unattended
BATTERY HANDLING
Attaching the strap....................................................................24
• The Green lamp blinks and CARD FULL appears on the LCD monitor
LCD monitor
GET AN ELECTRIC SHOCK.
6. DO NOT USE BATTERIES IF A FLUID LEAK, CHANGE OF
Video cable
Connecting to a personal computer..........................................98
and unused for long periods of time, unplug it from the wall outlet and
Recording mode
ON/OFF button
Loading the batteries ................................................................25
IGNORING THE WARNINGS BELOW MAY LEAD TO FLUID LEAK,
when the number reaches 0. (p. 117)
4. DO NOT STORE THE CAMERA IN ANY PLACE EXPOSED TO
COLOR/SHAPE OR OTHER ABNORMALITY IS FOUND, AND TAKE
disconnect the antenna or cable system. This will prevent damage to the
Insert SmartMedia.
Using a personal computer.......................................................99
(P. 31)
selection
When you take a picture that is backlit, position the subject within the
BATTERY HEAT GENERATION, FIRE, EXPLOSION, ELECTRIC SHOCK
Using the AC adapter (optional) ...............................................27
Note:
• The number of storable pictures varies depending on the selected
EXCESSIVE HEAT. THIS MAY WEAKEN THE PARTS OR CAUSE A
THEM TO AN AUTHORIZED OLYMPUS SERVICE CENTER.
product due to lightning and power-line surges.
Transferring data from SmartMedia........................................100
OR BURNING.
Note:
backlighting correction marks to fire the flash.
• We recommend that you check the date and time before taking important
Inserting SmartMedia ...............................................................28
recording mode. See page 59 for selecting the recording mode.
FIRE.
7. DO NOT USE OR STORE BATTERIES UNDER DIRECT SUNLIGHT OR
White balance
13. Overloading — Do not overload wall outlets, extension cords, or integral
• Since the shutter speed is slow, the use of a tripod is recommended to
PC Card Adapter ................................................................100
pictures.
Adjusting the date and time ......................................................29
IN HOT TEMPERATURES SUCH AS IN A HOT VEHICLE OR IN FRONT
Approx. Number of Storable Pictures
convenience receptacles as this can result in a risk of fire or electric
prevent blurred pictures. Moving subjects will appear blurry when
Control panel
• The setting will remain even after the power is turned off until it is
DANGER
FlashPath Floppydisk Adapter ............................................100
RED-EYE REDUCING FLASH
OF A HEATER.
Learning the basics ..................................................................31
shock.
Take pictures at a distance between 4" ~
CARE AND STORAGE
photographed.
readjusted.
LCD monitor
ISO
Using CAMEDIA Master .........................................................101
RS-232C PC serial cable
Recording
HANDLI
8. DO NOT UNLOAD BATTERIES IMMEDIATELY AFTER USING THE
1
2
Turning on the power............................................................31
SLOW
SLOW
14. Object and Liquid Entry — Never push objects of any kind into this
• The clock will continue to operate correctly after the year 2000.
1. WHEN USING NiMH BATTERIES, USE OLYMPUS BRAND NiMH
• Subjects closer than 4" (0.1 m) may turn out to be out of focus and
This mode significantly reduces the phenomenon of "red-eye".
Processing images using CAMEDIA Master ..........................103
CAMERA FOR A LONG TIME AS THEY GET HOT.
Checking the card.................................................................32
product through openings as they may touch dangerous voltage points or
BATTERIES AND CHARGER.
incorrectly exposed.
W A RNING
HANDLING
WB
WB
Number
Checking the batteries ..........................................................33
Drive
short-out parts that could result in a fire or electric shock. Never spill
RED-EYE REDUCING FLASH + SLOW
2. DO NOT LOAD OR USE BATTERIES WITH THEIR +/– TERMINALS
6
of pixels
• Using the LCD monitor as a viewfinder makes it easy to take close-up
MISCELLANEOUS ..............................................109
Do not use or store the camera in places exposed to direct sunlight (e.g. a
Checking the number of storable pictures ............................34
liquid of any kind on the product.
LCD monitor
UPSIDE DOWN. DO NOT LOAD BATTERIES FORCEFULLY.
SHUTTER SYNCHRONIZA
Memory
pictures (turns on automatically in the Macro mode).
beach in summer), excessive heat, humidity, extreme variations of
Questions and answers ..........................................................110
Holding the camera...............................................................35
3. DO NOT MODIFY OR DISASSEMBLE BATTERIES OR CONNECT
15. Servicing — Do not attempt to service this product yourself as opening or
capacity
Card function
temperature and humidity, sand or dust, excessive moisture, or vibrations
Troubleshooting ......................................................................112
• Power consumption increases when the LCD monitor is used.
Proper shutter release ..........................................................36
removing covers may expose you to dangerous voltage or other hazards.
THEM TO THE CAMERA USING SOLDER OR IN ANY OTHER WAY
AA alkaline batteries
2MB
(e.g. in a car).
The flash will fire automatically during the first half of a slow shutter
System chart...........................................................................116
Refer all servicing to qualified service personnel.
THAN INSTRUCTED IN THIS MANUAL. IT MAY DESTROY THE
Turning off the power ............................................................37
(4 pieces)
Note:
n Do not use or store the camera near a heater, cooler, or humidifier, or near
4MB
speed's release duration. It is especially great for taking photographs of
TERMINALS OR CAUSE BATTERY FLUID TO LEAK.
Error codes .............................................................................117
Beep sound
Working range
• Use 3V (3.3V) cards only. 5V cards cannot be used.
a fire, magnetic fields, or volatile materials.
people at night.
8MB
1
4. DO NOT CONNECT THE TERMINALS WITH METAL OR
x
Optional items.........................................................................118
• Olympus brand cards are recommended (already formatted). Non-
TAKING PICTURES...............................................39
n Do not shake the camera or subject it to shocks.
1. NEVER TRY TO USE THE FLASH WHEN TAKING PICTURES OF
CARRY/STORE BATTERIES WITH METALLIC NECKLACES OR
Macro mode (p.53)
Olympus brand cards must be formatted by the camera.
Notes on display and backlight ...............................................118
16MB
VIEWFINDER DISPLAY
Control panel
n Do not leave the camera with its lens pointing towards direct sunlight. This
File number
PEOPLE (ESPECIALLY INFANTS) AT CLOSE RANGE. THE CAMERA'S
Taking pictures..........................................................................40
HAIRPINS.
• When using a special function SmartMedia card (optional), insert it in the
Compatibility of the picture data .............................................119
Note:
will damage the lens.
32MB
FLASH MAY DAMAGE THE SUBJECT'S EYES AT CLOSE RANGE. DO
5. DO NOT CONNECT THE CAMERA DIRECTLY TO A POWER OUTLET
Standard mode
Taking pictures using the optical viewfinder..........................40
same way.
Specifications .........................................................................120
n Do not leave the camera unused for a long period of time. This may cause
• The camera emits pre-flashes before the regular flash.
NOT TAKE PICTURES OF CHILDREN FROM A DISTANCE OF LESS
OR CIGARETTE LIGHTER IN A VEHICLE.
64MB
Taking pictures using the LCD monitor .................................42
Setting reset
• It takes about a second before the Shutter is released.
battery leakage and can lead to problems including the growth of mold in
THAN THREE FEET.
6. DO NOT THROW BATTERIES INTO FIRE OR HEAT THEM.
Software CD
Quick view ............................................................................44
• Performance may be limited when the subject is not looking at the pre-
the camera. Before using, press the Shutter release button to check
2. DO NOT AIM YOUR CAMERA DIRECTLY AT THE SUN OR OTHER
7. IF BATTERY FLUID GETS IN YOUR EYES, DO NOT RUB THEM.
(containing software)
Note:
Focus lock ................................................................................45
operation.
flashes from right in front of the camera, or due to medication/alcohol
Close-up
EXTREMELY BRIGHT OBJECTS. THIS MAY DAMAGE YOUR EYES.
WASH THE FLUID OUT WITH CLEAN WATER AND CONTACT A
Caution:
• The number of storable pictures varies according to the recording mode.
n Do not turn the camera when it is mounted on a tripod. Turn the tripod head
intake or individual characteristics.
Autofocus..................................................................................46
correction marks
3. DO NOT USE THIS CAMERA IN THE VICINITY OF FLAMMABLE OR
PHYSICIAN IMMEDIATELY.
• NEVER open the card cover, eject the card, remove the batteries, or
TIFF requires more room in the card than other modes. (p. 34)
instead.
Working range ..........................................................................48
(P. 48)
EXPLOSIVE GAS.
Note:
pull the plug while the camera is in operation. It may destroy the data
Note:
• While HQ and SHQ images have the same number of pixels, SHQ uses
n Do not touch any of the camera's internal parts.
Using the flash..........................................................................49
Caution:
• Since the shutter speed is slow, the use of a tripod is recommended to
Note:
in the card.
• Because the amount of data used varies depending on the subject,
lower compression allowing for better image quality when enlarged. It
Note:
n Do not use the flash for extended periods as this can cause the flash to
Auto-flash .............................................................................50
• Attach the strap correctly as shown so that the camera does not fall
prevent blurred pictures. Moving subjects will appear blurry when
• Press the Shutter release button gently using the ball of your finger.
• The card is a precision instrument. Handle it carefully and do not
more/fewer pictures than the number shown may be photographed.
may take a little longer to record or display images in the SHQ mode.
• This mode can only be used in the SQ mode (automatically set).
become excessively hot. Do not touch the flash when it is hot.
Red-Eye reducing flash ........................................................50
off. If the strap is attached incorrectly and the camera comes loose
photographed.
• Avoid moving the camera when pressing the Shutter release button to
subject it to physical shocks.
• The number of storable pictures may not be reduced every time a picture
• The setting will remain even after the power is turned off until it is
• The Digital Tele mode will be canceled when the LCD monitor is turned
n Do not improperly open or modify the camera, as it may result in a shock or
and falls off, Olympus is not responsible for any damage.
• Do not touch the contact area of the card.
prevent blurry pictures.
is taken, or increased when a picture is erased.
readjusted.
off.
injury.
Downloaded From camera-usermanual.com
Downloaded From camera-usermanual.com
Downloaded From camera-usermanual.com
Downloaded From camera-usermanual.com
Downloaded From camera-usermanual.com
Downloaded From camera-usermanual.com
Downloaded From camera-usermanual.com
Downloaded From camera-usermanual.com
Downloaded From camera-usermanual.com
Downloaded From camera-usermanual.com
Downloaded From camera-usermanual.com
Downloaded From camera-usermanual.com
Downloaded From camera-usermanual.com
Downloaded From camera-usermanual.com
Downloaded From camera-usermanual.com
Downloaded From camera-usermanual.com
Downloaded From camera-usermanual.com
Downloaded From camera-usermanual.com
Downloaded From camera-usermanual.com
Downloaded From camera-usermanual.com
Downloaded From camera-usermanual.com
Downloaded From camera-usermanual.com
44
4
50
48
54
52
60
56
LCD monitor (P. 42)
Resolution
Shutter release button
Ignoring this Danger mark and operating this product
640 x 480
incorrectly may lead to serious injury or death.
Viewfinder
OR
1280 x 960
3
1280 x 960
Card error
SQ
SQ
SLOW
SLOW
incorrectly may lead to serious injury or death.
SHQ
SHQ
ISO
ISO
Viewfinder
SLOW
WB
WB
HQ
incorrectly may lead to injury.
WB
WB
Green
lamp
Batteries whose body is not covered by the insulating
sheet at all.
– button (P. 29)
Batteries whose
SQ
SQ
SHQ
SHQ
SQ
mode
+ button (P. 29)
terminal is covered by the insulating sheet.
ISO
ISO
640x480
Normal
Battery compartment open/close
30
lever (bottom) (P. 25)
Batteries whose
50
by the insulating sheet.
YES
2
122
SQ
x
NO
244
489
SET OK
SLOW
HQ
978
Batteries whose
the insulating sheet.
Autofocus mark (P. 40) /
Backlighting correction mark
(P. 50)
........ 8
Instructions/Warranty card/
Registration card
• For accurate setting, press the
Compression
1
OK button when the clock hits
1
Open the lens barrier
Make sure that the camera
Standard
00 seconds.
power is off.
BATTERIES
Standard
For taking standard pictures.
2
1
Minimal (JPEG)
Press the Macro/Digital Tele
When the lens barrier is open,
SQ
SQ
When there is no SmartMedia card
SLOW
SLOW
SHQ
No (TIFF – larger file size)
2
For setting +/–2 compensation.
button twice to turn on the
quickly press the LCD monitor
in the camera / the card is protected:
Backlighting correction
SmartMedia (SSFDC-8MB)
Open the Card compartment
ISO
ISO
(p. 57)
mark
LCD monitor in the Digital
ON/OFF button twice.
The Card error indicator on the
cover.
Picture frame
Number or storable pictures
Tele mode.
control panel and the Green lamp
• The LCD monitor will display
For obtaining the right exposure.
• Press the + button for 2X
blink.
the last picture taken. (p. 72)
(p. 58)
Close-up correction
magnification.
3
Insert the SmartMedia card
For selecting the recording mode.
• Press the – button to return to
correctly as shown.
(p. 59)
Press the Shutter release button
2
1X.
To return to the Record mode,
Image area of picture at close
halfway to lock the focus and
Static-free case
For presetting the white balance.
press
distance
exposure.
(p. 61)
4
ON/OFF button or press the
Close the cover tightly.
3
• The Green lamp next to the
Take a picture.
terminal is flat and a part of the
Shutter
For setting the sensitivity. (p. 62)
viewfinder lights.
HQ
When the card needs to be
halfway.
• If the Green lamp blinks, the focus
formatted:
or exposure is not locked. Check
For using the Sequence mode. (p. 63)
The Card error indicator on the
the working distance. (p. 48)
TION FLASH
control panel lights, and the camera
High
HQ
Instructions
For taking panorama pictures or using
enters the Card format mode. (p. 84)
8
9
optional special function cards. (p. 65)
terminal is raised but not covered
Press the Shutter release button
16
18
For setting on/off. (p. 67)
fully to release the shutter and
32
36
take the picture.
"
"
4
~ 20
(0.1 m ~ 0.5 m)
65
73
• The camera emits a beep sound
For selecting the file
when the shutter is released.
130
146
numbering system. (p. 68)
"
20
~
(0.5 m ~
Write-protect adhesive
• The Green lamp blinks while the
260
292
terminal is flat and not covered by
For keeping changed settings even
seals (4 pieces)
picture is being recorded.
after the power is turned off. (p. 70)
Index labels (2 pieces)
TION
.
Use
OF
DIFFERENT
the
LCD
(0.1 m ~
).
release
SHQ
1600x1200
Control panel
SHQ
S H Q - T I F F
HQ
Threaded mount (bottom)
4
9
18
36
73
)
148
Green lamp (P. 40)
SLOW
monitor
button
SLOW
0
1
2
4
8
16

Advertisement

Table of Contents
loading

Table of Contents