JVC RX-8010RBK Service Manual page 132

CD player
After pressing CD, you can perform the following operations on the
CD player:
3 PLAY:
Starts playing.
4:
Returns to the beginning of the current
(or previous) track.
¢:
Skips to the beginning of the next track.
7 STOP:
Stops playing.
8 PAUSE:
Pauses playing. To release it, press
3 PLAY.
1 – 10, +10: Selects a track number directly.
For track number 5, press 5.
For track number 15, press +10, then 5.
For track number 20, press +10, then 10.
For track number 30, press +10, +10,
then 10.
CD changer
After selecting "CDDSC" by pressing CONTROL repeatedly, you
can perform the following operations on a CD changer:
3 PLAY:
Starts playing.
4:
Returns to the beginning of the current
(or previous) track.
¢:
Skips to the beginning of the next track.
7 STOP:
Stops playing.
8 PAUSE:
Pauses playing. To release it, press
3 PLAY.
1 – 6, 7/P: Selects the number of a disc installed in
a CD changer.
After pressing CD, you can perform the following operations on the
CD changer:
1 – 10, +10: Selects a track number directly.
For track number 5, press 5.
For track number 15, press +10, then 5.
For track number 20, press +10, then 10.
For track number 30, press +10, +10,
then 10.
EXAMPLE:
• Selecting disc number 4, track number 12, and starting playback.
1. Press CONTROL repeatedly until "CDDSC" appears on the
display window, then press 4.
2. Press CD, then press +10, 2.
Turntable
After pressing PHONO, you can perform the following operations
on a turntable:
3 PLAY:
Starts playing.
7 STOP:
Stops operations.
CD recorder
After pressing CDR (or selecting "CDR" by pressing CONTROL
repeatedly), you can perform the following operations on a CD
recorder:
3 PLAY:
Starts playing.
4:
Returns to the beginning of the current
(or previous) track.
¢:
Skips to the beginning of the next track.
7 STOP:
Stops playing.
8 PAUSE:
Pauses playing. To release it, press
3 PLAY.
1 – 10, +10: Selects a track number directly.
For track number 5, press 5.
For track number 15, press +10, then 5.
For track number 20, press +10, then 10.
For track number 30, press +10, +10,
then 10.
Notes:
• When you start recording on the CD recorder, use the buttons on
the CD recorder itself or on the remote control supplied with it.
• You can use either CDR or CONTROL to activate the buttons listed
above. If you press CDR, the playing source also changes. On the
other hand, if you press CONTROL repeatedly to select "CDR," the
playing source does not change.
Cassette deck
After pressing TAPE/MD (or selecting "TAPE" by pressing
CONTROL repeatedly), you can perform the following operations
on a cassette deck:
3 PLAY:
Starts playing.
REW:
Fast winds the tape from right to left.
FF: Fast winds the tape from left to right.
7 STOP:
Stops operations.
8 PAUSE:
Pauses playing. To release it, press
3 PLAY.
REC PAUSE: Enters recording pause.
Notes:
• You can use either TAPE/MD or CONTROL to activate the buttons
listed above. If you press TAPE/MD, the playing source also
changes. On the other hand, if you press CONTROL repeatedly to
select "TAPE," the playing source does not change.
• When you use a cassette deck, change the source name
connected to TAPE/MD jacks correctly (see page 16).
MD recorder
After pressing TAPE/MD, you can perform the following operations
on the MD recorder:
3 PLAY:
Starts playing.
4:
Returns to the beginning of the current
(or previous) track.
¢:
Skips to the beginning of the next track.
7 STOP:
Stops playing.
8 PAUSE:
Pauses playing. To release it, press
3 PLAY.
REC PAUSE: Enters recording pause.
Note:
When you use an MD recorder, change the source name connected
to TAPE/MD jacks correctly (see page 16).
52