Brocade Communications Systems VDX 8770-4 Hardware Installation Manual page 46

FIGURE 19 Attaching the side duct into the left rail (right-front view)
1. Side duct
2. Left rail
5. Install the top intake assembly into rack.
The top intake assembly can be adjusted to a length between 27 and 31 inches (68.58 to 78.74 cm) to fit in the rack rails. To
lengthen or shorten the intake assembly, loosen the 6-32 screws located in the four slots at the rear of the intake assembly, as
shown in the following figure. The length will be approximately the length of the adjustable rails.
46
3. Right rail
4. Side duct screw locations in left rail
Brocade VDX 8770-4 Hardware Installation Guide
Mounting the Device
53-1002563-10