Timer Recording Faq; Simultaneous Recording And Playback - Pioneer DVR-320-S Operating Instructions Manual

Recording
06

Timer recording FAQ

Frequently Asked Questions
• Even though the timer is set, the recorder doesn't start
recording!
Check that the disc loaded is recordable, not locked
(see Lock Disc on page 68), and that there are fewer
than 99 titles already on the DVD.
• The recorder won't let me enter a timer program! Why
not?
You can't enter a timer program if the clock isn't set.
• What happens when two or more timer programs
overlap?
Basically, the program with the earlier recording start
time has priority. However, the recorder will start
recording the program with the later start time after
the earlier program is finished. If two programs have
the same times (but different channels, for example),
the program set most recently takes priority.
• I entered a timer program, but the recorder doesn't
confirm whether or not it's OK. Why not?
Timer confirmation only works for DVD recordings
when there is a recordable disc loaded. Also make
sure that the disc is not locked (see Lock Disc on
page 68) and that there are fewer than 99 titles
already recorded. Note that it's possible that
although the timer recording screen says OK, the
recording doesn't complete successfully because of
some other reason, such as a damaged disc, etc.
Simultaneous recording and
playback
VR mode
A feature called Chase Play makes it possible to watch a
recording in progress from the start of the recording (as
in, playback is 'chasing' the recording). For example,
perhaps you have to miss the first 30 minutes of a movie
on TV; you can start recording, then start watching the
movie, from the beginning, while the recorder is still
recording 30 minutes ahead of you.
In fact, you're not just limited to watching the recording
in progress; you can watch anything else already on the
DVD by selecting it from the Disc Navigator screen (see
Using the Disc Navigator with recordable discs on
page 34).
50
En
Important
• Note that you must use a DVD-RW Ver. 1.1 / 2x or
Ver. 1.2 / 4x disc to be able to use this feature.
• You may not be able to use this feature with a
DVD-RW disc that was first initialized on another
recorder.
• During recording, press
from the beginning of the current recording, or press
DISC NAVIGATOR and select another title to play
from there.
You can use all the usual playback controls, such as
pause, slow-motion play, scan and skip.
• To stop playback, press
continue).
• To stop recording, press
continue).
Note
• You can't start playback immediately after recording
starts.
• When scanning, no sound is output if the recorder is
also recording (see Scanning discs on page 35).
• You can't use this feature during Auto Start
Recording, or in Auto Start Recording standby (the
AUTO indicator is lit in the front panel display).
PLAY to start playback
STOP (recording will
STOP REC (playback will