Connecting up
02
Chapter 2
Connecting up
Rear panel connections
1
OUT
IN
VHF/UHF
1
VHF/UHF IN/OUT
Connect your TV antenna to the VHF/UHF IN jack. The
signal is passed through to the VHF/UHF OUT jack for
connection to your TV.
2
COMPONENT VIDEO OUT
A high-quality video output for connecting to a TV or
monitor with a component video input.
3
Audio/video outputs 1 and 2
Two sets of audio/video outputs (stereo analog audio;
composite and S-video video) that you can use to connect
TVs or monitors.
4
Audio/video inputs 1 and 3
Two sets of audio/video inputs (stereo analog audio;
composite and S-video video) that you can use to connect
to satellite receivers, TVs, VCR or other source
component for recording.
5
CONTROL IN
Use to control this recorder from the remote sensor of
another Pioneer component with a CONTROL OUT
terminal and bearing the Pioneer
CONTROL OUT of the other component to the
CONTROL IN of this recorder using a mini-plug cord.
6
OPTICAL DIGITAL OUT
A digital audio output for connecting to an AV amp/
receiver, Dolby Digital/DTS decoder or other equipment
with optical digital input.
7
AC IN
Connect to a power outlet using the supplied power cable
after making all other connections.
12
En
2
3
OUTPUT 1
R
L
AUDIO
Y
P
P
VIDEO
B
R
S-VIDEO
COMPONENT VIDEO OUT
OUTPUT 2
mark. Connect the
4
INPUT 1/
R
L
AUTO START
REC
IN
OPTICAL
AUDIO
VIDEO
S-VIDEO
CONTROL
DIGITAL OUT
INPUT 3
5 6
Front panel connections
S-VIDEO
VIDEO
On the left side of the front panel a flip-down cover hides
a third audio/video input, consisting of an S-video and
standard (composite) video jack, and stereo analog audio
jacks.
7
AC IN
VIDEO/R/RW
PULL-OPEN