Pioneer DVR-320-S Operating Instructions Manual page 49

Recording
Moving the end time by 30-minute blocks
1 During timer recording, press and hold
three seconds.
The timer indicator disappears from the front panel
display.
2 Press REC repeatedly to extend recording in 30
minute increments.
Programming a new end time
1 During timer recording, press TIMER REC to
display the Timer Recording screen.
You can also access the Timer Recording screen from
the Home Menu (press HOME MENU, select Timer
Recording, then Timer Recording (View)).
Timer Recording
Date Start Stop
WED 13/12 7:00 8:00
New Input
DVD Remain
2 Use the (cursor up) button to highlight the
current timer recording ('Recording' is shown in the
'Confirm' column), then press ENTER.
A screen showing details of the timer recording appears.
From this screen, only the recording stop time can be
changed.
Timer Recording
Date Start
TUE 12/12 10 00
Program Set
3 Set a new Stop time for the timer recording.
Use the (cursor left/right) buttons to select the
hour or minute field, then use the
buttons to change the time.
4 Press ENTER to set the new time and exit the
screen.
Recording will continue until the new stop time is
reached.
REC for
CH Mode Confirm
Pr 3 SP Recording
1/1
1h20m (SP)
Stop CH Rec Mode
11 00 Pr 7 SP
Ttl Name Input
(cursor up/down)
Canceling and stopping a timer recording in
progress
After a timer recording has started, you can cancel the
program (but continue recording), or stop recording
completely if you need to.
REC STOP REC
1 During timer recording, press and hold
three seconds.
Only the program is canceled (the timer indicator
disappears); recording continues so that you can
manually stop recording whenever you like.
2 When you want to stop recording completely,
press STOP REC.
Preventing use of the recorder before a
timer recording (child lock)
You can make all the front panel and remote control
buttons inoperative using the child lock feature. This is
useful when you set a timer recording and want to make
sure that the timer settings are not changed before
recording has finished.
1 If the recorder is on, switch it into standby.
2 Press and hold STOP on the front panel for
three seconds to lock the controls.
The front panel display briefly shows LOCK. If any buttons
are pressed on the remote or front panel, LOCK is briefly
displayed again.
• To unlock the recorder, press and hold
the front panel for three seconds until the display
shows UNLOCK.
• To cancel a timer recording when the recorder is
locked, first unlock the recorder (see above), then
REC for three seconds.
press and hold
06
REC for
STOP on
49
En