• Only use the device if sufficient safety precautions were taken at the surveyed location (e.g. when performing measurements along public roads, on building sites etc.). Otherwise do not use the device. • Observe the storage and operating conditions (see chapter Technical data). Operating manual – gas detector BG40...
To prevent damages to the device, do not expose it to Do not use the device in potentially explosive atmospheres, for extreme temperatures, extreme humidity or moisture. measurements in liquids and at live parts. Trotec accepts no liability for damages resulting from improper use. In such a Notice case, any warranty claims will be voided.
You cannot make any further settings, such as 2. Connect the charging cable to the device connection. switching the vibration on or off, during calibration. 2,5h ð If the device is switched on, a charging indicator will appear on the display. Operating manual – gas detector BG40...
Page 7
The vibration alarm is enabled when the device is switched on. The enabled vibration alarm is indicated by the Vibration indication (15) on the display. 1. Press the Vibration button (12) to switch the vibration alarm on or off. Operating manual – gas detector BG40...
Repair Do not modify the device or install any spare parts. For repairs or device testing, contact the manufacturer. Operating manual – gas detector BG40...
Page 10
Trotec GmbH & Co. KG Grebbener Str. 7 D-52525 Heinsberg +49 2452 962-400 +49 2452 962-200 info@trotec.com www.trotec.com...