Intended use Only use the device for detecting alternating voltages whilst adhering to the technical data. To use the device for its intended use, only use accessories and spare parts which have been approved by Trotec. voltage detector BE15...
Keep a sufficient distance from heat sources. Note To prevent damages to the device, do not expose it to extreme temperatures, extreme humidity or moisture. Note Do not use abrasive cleaners or solvents to clean the device. voltage detector BE15...
4. Slide the battery compartment cover (5) back onto the with max. 80 % RH device and make sure that the clip (2) engages. Scope of delivery 1 x Voltage detector BE15 2 x 1.5 V battery AAA (Micro) 1 x Quick guide Transport and storage...
Page 5
To do so, hold the measuring tip (7) to a known source of voltage. ð If there is an AC voltage within the selected sensitivity range present at the source, the measuring tip (7) will flash and a repetitive beep will be emitted. voltage detector BE15...
Directive 2006/66/EC of the European Parliament and of the Council of 6 September 2006 on batteries and accumulators. Please dispose of batteries and accumulators according to the relevant legal requirements. voltage detector BE15...
Page 8
Trotec GmbH & Co. KG Grebbener Str. 7 D-52525 Heinsberg +49 2452 962-400 +49 2452 962-200 info@trotec.com www.trotec.com...