Advertisement
Quick Links
Advertisement
Related Manuals for Trotec BE16
Summary of Contents for Trotec BE16
- Page 1 BE16 OPERATING MANUAL VOLTAGE DETECTOR...
-
Page 2: Table Of Contents
To use the device for its intended use, only use accessories and Caution spare parts which have been approved by Trotec. This signal word indicates a hazard with a low risk Foreseeable misuse level which, if not avoided, can result in minor or The device is not suitable for the accurate measurement of moderate injury. - Page 3 Warning Risk of suffocation! Do not leave the packaging lying around. Children may use it as a dangerous toy. Warning The device is not a toy and does not belong in the hands of children. voltage detector BE16...
-
Page 4: Information About The Device
• with a cover to protect it from invasive dust if necessary measurement sensitivity) • the storage temperature complies with the values specified LED torch power button in the Technical data LED torch • Remove the batteries from the device. Measuring tip Battery compartment Protective collar voltage detector BE16... -
Page 5: Operation
The device cannot detect AC voltages below 5 V or above 1000 V. Setting the measurement sensitivity You can adjust the device's measurement sensitivity by means of the thumbwheel (1). The device can detect AC voltages between 5 V and 1000 V directly after switch-on. voltage detector BE16... -
Page 6: Maintenance And Repair
ð If there is an AC voltage within the selected sensitivity that apply for many EU countries on the website range present at the source, the measuring tip (4) will https://hub.trotec.com/?id=45090. Otherwise, please contact an flash and a repetitive beep will be emitted. official recycling centre for electronic and electrical equipment Switching on the torch authorised for your country. - Page 7 Trotec GmbH Grebbener Str. 7 D-52525 Heinsberg +49 2452 962-400 +49 2452 962-200 info@trotec.com www.trotec.com...