Advertisement
Quick Links
Advertisement
Related Manuals for Trotec BG40
Summary of Contents for Trotec BG40
- Page 1 BG40 OPERATING MANUAL GAS DETECTOR...
-
Page 2: Table Of Contents
• Observe the storage and operating conditions as given in the Technical data chapter. • High concentrations of highly flammable gases can cause explosions, fire, suffocation and other hazards. Please obtain information on the gas you are working with and take the appropriate precautions. gas detector BG40... - Page 3 Do not use the device for measurements in liquids and at live Risk of suffocation! parts. Trotec accepts no liability for damages resulting from Do not leave the packaging lying around. Children may improper use. In such a case, any warranty claims will be use it as a dangerous toy.
-
Page 4: Information About The Device
LEL, the gas does not burn. Gas detectors for combustible gases are generally calibrated for 0 – 100 % LEL. Vibration button Device depiction Zero reset button Designation Gooseneck probe Tripod thread Battery compartment with cover Charging cable connection Operating elements Display gas detector BG40... - Page 5 401 to 700 ppm 4001 to 7000 ppm 1.65 Hz 701 to 1000 ppm 7001 to 10000 ppm 3.25 Hz ≥ 1000 ppm ≥ 10000 ppm 6.25 Hz Scope of delivery • 1 x Device BG40 • 1 x Charger • 1 x Quick guide gas detector BG40...
-
Page 6: Transport And Storage
2. Connect the charging cable to the device connection. the Technical data chapter. 2,5h ð If the device is switched on, a charging indicator will appear on the display. 3. Wait until the battery is fully charged (approx. 2.5 h). gas detector BG40... - Page 7 This physical and unavoidable effect can falsify the measurement. In this case, the display shows either no measured values or they are incorrect. Wait a few minutes until the device has become adjusted to the changed conditions before carrying out a measurement. gas detector BG40...
-
Page 8: Maintenance And Repair
ð The AutoZero indication (24) appears on the display. 2. Press the Zero reset button (13) again to disable zero reset. Please note that the original calibration will not be restored! For this purpose, you have to reset or restart the device again. gas detector BG40... -
Page 9: Errors And Faults
For further return options provided by us please Operation refer to our website https://de.trotec.com/shop/. chapter. The separate collection of waste electrical and electronic The display flashes The sensor or the... - Page 10 Trotec GmbH Grebbener Str. 7 D-52525 Heinsberg +49 2452 962-400 +49 2452 962-200 info@trotec.com www.trotec.com...