Advertisement
Quick Links
Advertisement
Related Manuals for Trotec BE20
Summary of Contents for Trotec BE20
- Page 1 BE20 OPERATING MANUAL VOLTAGE DETECTOR...
-
Page 2: Table Of Contents
• The voltage detector must not be used when the battery compartment is open. • At locations with load background noises, check whether the acoustic signals of the device can be perceived before using the device. voltage detector BE20... - Page 3 To use the device for its intended use, only use accessories and rest period of 10 minutes has elapsed. spare parts which have been approved by Trotec. • After each use, screw the supplied test probe protectors onto the two test probes to prevent injuries.
- Page 4 Warning Risk of suffocation! Do not leave the packaging lying around. Children may use it as a dangerous toy. Warning The device is not a toy and does not belong in the hands of children. voltage detector BE20...
-
Page 5: Information About The Device
Left-turning rotary field direction display (L) Right-turning rotary field direction display (R) Continuity check indication Polarity indicator AC + Polarity indicator AC – Voltage detection LED displays Designation Test probe L1 (–) Test probe L2 (+) LED torch Display Autotest button LED torch power button Battery compartment Protection against contact voltage detector BE20... -
Page 6: Transport And Storage
100 to 690 V AC Frequency range 50/60 Hz Continuity test Measuring range < 300 k Ω Test current < 5 µ A Overvoltage protection 690 V AC/DC Phase sequence indicator Voltage range 100 to 400 V Frequency range 50/60 Hz Measuring principle double-pole and contact- electrode Scope of delivery • 1 x Voltage detector BE20 • 1 x Manual voltage detector BE20... -
Page 7: Operation
ð If the autotest has been successful, an acoustic signal is display tolerance). emitted. Note A defective voltage detector must not be used. If the device does not react as described when you carry out the function test, no longer use the voltage detector. voltage detector BE20... - Page 8 ð According to the existing voltage, the respective voltage detection LED displays (14) are illuminated on the display (4). ð The respective polarity indicator (13) is illuminated. ð If both polarity indicators AC + and AC – (13) are illuminated simultaneously, there is an AC voltage. voltage detector BE20...
- Page 9 1. Press and hold the LED torch power button (6). ð The LED torch (3) will be illuminated for as long as the LED torch power button (6) is pressed. 2. Let go of the LED torch power button (6) to switch off the LED torch. voltage detector BE20...
-
Page 10: Errors And Faults
The device still does not operate correctly after these equipment. checks? Please contact the Trotec customer service. Maintenance and repair In the European Union, batteries and accumulators must not be treated as domestic waste, but must be disposed of... - Page 11 Trotec GmbH Grebbener Str. 7 D-52525 Heinsberg +49 2452 962-400 +49 2452 962-200 info@trotec.com www.trotec.com...