LED indicators does not function correctly or if the correct functionality of the device cannot be clearly recognized. • Observe the maximum permissible duty cycle of https://hub.trotec.com/?id=43620 30 seconds for voltage detection. The device must never be applied to voltages for more than 30 seconds. voltage detector BE17...
Page 3
To use the device for its intended use, only use accessories and • Depending on the internal impedance of the voltage spare parts which have been approved by Trotec. detector, the device may either indicate "operating voltage Improper use present"...
TEST button Note Test probe L2 (–) To prevent damages to the device, do not expose it to extreme temperatures, extreme humidity or moisture. Note Do not use abrasive cleaners or solvents to clean the device. voltage detector BE17...
• dry and protected from frost and heat • protected from dust and direct sunlight • with a cover to protect it from invasive dust if necessary • The storage temperature is the same as the range given in the Technical data chapter. voltage detector BE17...
Test button (3) is simultaneously actuated, residual current is simulated and the according residual current device (RCD) trips. If the residual current device does not trip, have the electric installation checked by a professional electrician. voltage detector BE17...