Adjusting Your Instrument Settings
System - Quick Start
When the instrument is first used, the SYSTEM mode should be used to set
the preferred operating options :-
Use the and keys to scroll through the features
Use the and keys to select the options
Press [OK] to accept the selections and return to the testing mode
Select the backlight preference, on or off. Having the backlight on
significantly reduces the battery lifetime.
Select the language required from English, French, German, Spanish,
Italian or Turkish
Select the display units required from mg/l or ppm
Set the sample number option to 'On' to allow the entry of a sample
number during normal photometer operation
Set the sample increment option to 'On' to automatically increase the
sample number
Set the dilution factor to 'On' or 'Off'. If the dilution factor option is set to
'On', the instrument will allow the entry of a numerical factor which will
be used in the calculation of the result to be displayed on the instrument
Select the preferred date format. The date may be shown in either
Date/Month/Year or Month/Date/Year
To change the date and time, select the date and time line then edit the
date and time using the ,,and keys to move the cursor and key
in the correct data.
Select your temperature units of preference.
12