Garmin GPSMAP 296 Pilot's Manual page 69

To measure the Bearing/Distance between two points:
1. Highlight the 'Measure Distance' option and press
the map display at your present position with 'ENT REF' below it.
2. Move the cursor to the desired reference point (the starting point that you want to measure from) and
press . A push-pin icon marks the starting point on the map display.
ENTER/MARK
3. Move the cursor to the point to which you want to measure. The bearing and distance from the
reference point and cursor coordinates are displayed in the data window at the top of the display.
4. Press the QUIT key to fi nish.
To set up the page layout:
1. Highlight 'Set Up Page Layout' from the Options Menu and press
2. Select the desired option and press
To change a data fi eld display:
1. From the Options Menu, highlight 'Change Data Fields' and press
2. Move the fi eld highlight to the data fi eld you want to change and press
3. Press UP or DOWN on the ARROW KEYPAD
ENTER/MARK .
4. Press to exit.
QUIT
. An on-screen pointer appears on
ENTER/MARK
ENTER/MARK
ENTER/MARK . The options vary between the three usage modes.
ENTER/MARK
to highlight the data you want to display, and press
Changing a Data Field
.
.
.
ENTER/MARK
Main Pages
Map Page
Measure Distance
Map Page Layout Options ( Aviation Mode)
61