Before You Begin - Cisco AP541N Quick Start Manual

REVIEW DRAFT — CISCO CONFIDENTIAL
1

Before You Begin

Decide if you are going to configure the device by using a static IP address
or the IP address assigned by a network DHCP server.
It is expected that a static IP address to be assigned to the
N
OTE
access point is based on the network topology and known prior
to installation.
If while displaying the configuration window the IP address is
changed, either by a DHCP server or manually, you will loose
connectivity between the PC and the access point.
Also make sure that you have the following equipment and services:
• Tools for installing the hardware
• PC with Microsoft Internet Explorer (version 6 and higher), Firefox
(version 3 or higher), or Safari (for Mac).
• TBD
• TBD
• Need Eng to provide the information for this section.
2 Cisco AP541N Dual-band Single-radio Access Point Quick Start Guide