Before You Begin - Cisco WAP125 Quick Start Manual

Welcome
Thank you for choosing the Cisco WAP125 Wireless-AC/N Dual Band
Desktop Access Point with PoE. The Cisco WAP125 is an indoor
concurrent dual-band radio 802.11ac and 802.11n access point with
Power over Ethernet (PoE). -PoE Supplied by UL Listed I.T.E.
The unit should be connected to PoE networks only, without routing to
N
OTE
the outside plant.
This guide provides the general layout of the Cisco WAP125, describes
how to deploy the Cisco WAP125 in your network, and also details how to
configure the Cisco WAP125. For additional information, see
www.cisco.com/go/100_wap_resources.
Package Contents
• Wireless Access Point
• Power Adapter
• This Quick Start Guide
• Ethernet Cable
• Technical Support Contact
• Pointer Card China RoHS
• EU Directives 1999/5/EC Compliance Information (for EU SKU only)

Before You Begin

1
Before you begin the installation, make sure that you have the following
equipment and services:
• A computer with one of the following browser support:
– Internet Explorer 9.0 or later
– A recent version of either Chrome, Firefox or Safari
• Tools for installing the hardware
• FindIT tool for locating the access point
• One or more Ethernet network switches with PoE is a plus
• Mobile devices (iPhone, Android, etc.) via wireless setup SSID.
(Configure via Wi-Fi mobile device with a web browser.)
2 Cisco WAP125 Quick Start Guide