Getting Started With The Configuration - Cisco AP541N Quick Start Manual

REVIEW DRAFT — CISCO CONFIDENTIAL
6
Getting Started with the
Configuration
This section contains information for starting the configuration utility to
provision the access point features. It also describes enabling the radio
that is turned off by default.
You can display the configuration utility by entering the access point IP
address in the URL field of a Web browser. The access point IP address is
the:
• factory default access point static IP address, if it has not been
changed in a previous configuration or replaced by an IP address
assigned by a DHCP server running on the network.
• dynamically assigned IP address allocated to the access point by a
DHCP server.
If you deploy the Cisco AP541N in a Cisco Small Business
T
IP
Pro network that is running DHCP, you can use
Cisco Configuration Assistant 2.0 or higher to discover the
Cisco AP541N IP address.
The factory defaults are:
Parameter
username
password
IP connection type
default IP
subnetmask
default gateway
data VLAN
voice VLAN
radio
data SSID
Cisco AP541N Dual-band Single-radio Access Point Quick Start Guide
Default Value
cisco
cisco
DHCP
192. 1 68. 1 0. 1 0
255.255.255.0
192. 1 68. 1 0. 1
1
100
Off
cisco–data (VLAN 1)
9