Setting The Tv System - Pioneer DV-610AV-K Operating Instructions Manual

Standard TV users
09
If you have a standard TV, the
setting (page 39) of this player should be set to
4:3 (Letter Box) or
on which you prefer.
Set to 4:3 (Letter Box)
shown with black bars top and bottom.
Set to
4:3 (Pan & Scan)
shown with the left and right sides cropped.
Although the picture looks larger, you don't
actually see the whole picture.
Please note that many widescreen discs
override the player's settings so that the disc is
shown in letter box format regardless of the
setting.
Note
• Using the
16:9 (Wide)
(Compressed)
TV, or either of the 4:3 settings with a
widescreen TV, will result in a distorted
picture.
52
En
TV Screen
4:3 (Pan & Scan) , depending
, widescreen discs are
, widescreen discs are
or
16: 9
setting with a standard 4:3

Setting the TV system

(Except Taiwanese model)
The default setting of this player is
unless you notice that the picture is distorted
when playing some discs, you should leave it
set to AUTO . If you experience picture
distortion with some discs, set the TV system
to match your country or region's system.
Doing this, however, may restrict the kinds of
disc you can watch. The table below shows
what kinds of disc are compatible with each
setting ( , and
AUTO NTSC
If the player is on, press  STANDBY/
1
ON to switch it to standby.
2 Using the front panel controls, hold
down  then press  STANDBY/ON to
switch the TV system.
The TV system changes as follows:

• AUTO NTSC

•
NTSC PAL

•
PAL AUTO
Note
• You have to switch the player into standby
(press  STANDBY/ON) before each
change.
Disc Type
Format NTSC
DVD/ NTSC
Super VCD/
Video CD/
PAL
DivX video/
WMV
CD/MP3/
WMA/
MPEG-4 AAC —
/JPEG
no disc
, and
AUTO
).
PAL
Player setting
PAL AUTO
NTSC PAL NTSC
NTSC PAL PAL
NTSC
NTSC PAL
or PAL