Digital Audio Out Settings - Pioneer DV-610AV-K Operating Instructions Manual

Digital Audio Out settings

08
Setting
HDMI Out
Digital Out
Dolby Digital Out
DTS Out
Linear PCM Out
MPEG Out
38
En
Option
LPCM (2CH)
LPCM (5.1CH)
Auto
Auto (DSD)
Off
On
Off
Dolby Digital
Dolby Digital > PCM
DTS
DTS > PCM
Down Sample On
Down Sample Off
MPEG
MPEG > PCM
What it means
Set if your monitor or device only accepts stereo
input. On this setting multichannel audio is
downmixed to 2 channels for stereo linear PCM
output.
Set if the monitor or device you have connected
using HDMI is compatible with Linear PCM multi-
channel formats. All audio signals are output as
linear PCM 5.1 format. (Use this setting if you want
to decode all streams by a player.)
Dolby Digital, DTS and MPEG sources are
processed according to how they were encoded,
and linear PCM sources are heard as is.
Set if you want to output DSD audio from an SACD
source.
No digital audio output. Choose this option when
you want to change the Digital Audio Out and
Speakers settings.
Digital audio is output from the digital outputs.
No digital audio output.
Dolby Digital encoded digital audio is output when
playing a Dolby Digital DVD disc.
Dolby Digital audio is converted to PCM audio
before being output.
DTS encoded digital audio is output when playing a
DTS disc. (Noise will be output if your amplifier/
receiver is not compatible with DTS audio.)
No digital audio is output when playing a DTS
disc.DTS audio is converted to PCM audio before
being output.
96 kHz digital audio is converted to 48 kHz for
digital output. Note that High sampling rate DVD-
Audio discs (192 kHz or 176.4 kHz) automatically
output down-sampled audio through the digital
outputs.
96 kHz digital audio is output as is at 96 kHz.
MPEG encoded digital audio is output as is.
MPEG encoded digital audio is converted to PCM
audio for digital output.