Registering A New Password; Changing Your Password - Pioneer DV-610AV-K Operating Instructions Manual

08
Note
• Not all discs use Parental Lock, and will
play without requiring the password first.
• If you forget your password, you'll need to
reset the player to register a new password
(see Resetting the player on page 53).

Registering a new password

You must register a password before you can
change the Parental Lock level or enter a
Country code.
1 Select 'Options', then 'Password'.
Initial Settings
Digital Audio Out
Video Output
Language
Display
Options
Speakers
2 Use the number buttons to enter a
4-digit password.
The numbers you enter show up as asterisks
(*) on-screen.
3 Press ENTER to register the password.
You will return to the Options menu screen.

Changing your password

To change your password, confirm your
existing password then enter a new one.
1 Select 'Password Change'.
2 Use the number buttons to enter your
existing password, then press ENTER.
3 Enter a new password and press
ENTER.
This registers the new password and you will
return to the Options menu screen.
42
En
Parental Lock Password
DVD Playback Mode Level Change
SACD Playback Country Code
DTS Downmix
DivX VOD
Setting/changing the Parental Lock
1 Select 'Level Change'.
2 Use number buttons to enter your
password, then press ENTER.
3 Select a new level and press ENTER.
• Press  (cursor left) repeatedly to lock
more levels (more discs will require the
password); press  (cursor right) to
unlock levels. You can't lock level 1.
This sets the new level and you will return to
the Options menu screen.
Setting/changing the Country/Area
code
You can find the Country/Area code list on
page 60.
1 Select 'Country Code'.
2 Use number buttons to enter your
password, then press ENTER.
3 Select a Country/Area code and press
ENTER.
There are two ways you can do this:
• Select by code letter: Use / (cursor up/
down) to change the Country/Area code.
• Select by code number: Press (cursor
right) then use the number buttons to
enter the 4-digit Country/Area code.
The new Country/Area code is set and you will
return to the Options menu screen. Note that
the new Country/Area code doesn't take effect
until the next disc is loaded (or the current disc
is reloaded).